Beschreibung
Flange dimensions: 100 mm
Rated Output Power: 820 – 1570 W
Rated Torque: 2,61 – 5,0 Nm
Rated Speed: 3000 rpm
Loggen Sie sich ein, um Preise für dieses Produkt zu sehen
inkl. MwSt.
Flange dimensions: 100 mm
Rated Output Power: 820 – 1570 W
Rated Torque: 2,61 – 5,0 Nm
Rated Speed: 3000 rpm
Flange dimensions: 100 mm
Rated Output Power: 820 – 1570 W
Rated Torque: 2,61 – 5,0 Nm
Rated Speed: 3000 rpm
Specification | TC 100 3,2 21 | TC 100 3,2 15 | TC 100 5,6 15 | TC 100 8 15 |
---|---|---|---|---|
Continous Stall Torque | 3.2 Nm | 3.2 Nm | 5.6 Nm | 8 Nm |
Peak Torque | 11 Nm | 11 Nm | 22 Nm | 33 Nm |
Nominal Torque | 2.61 Nm | 2.61 Nm | 4.2 Nm | 5 Nm |
Rated Voltage | 230 V | 400 V | 400 V | 400 V |
Nominal power | 820 W | 820 W | 1320 W | 1570 W |
Continuous stall Current | 6.08 Arms | 3.52 Arms | 6.15 Arms | 8.79 Arms |
Maximun Current | 20.91 Arms | 12.09 Arms | 24.18 Arms | 36.27 Arms |
Nominal Current | 5.11 Arms | 2.96 Arms | 4.76 Arms | 5.66 Arms |
Nominal working Speed | 3000 rpm | 3000 rpm | 3000 rpm | 3000 rpm |
Maximum working speed 230VAC | 5000 rpm | 3900 rpm | 3900 rpm | 3900 rpm |
Maximum working speed 400VAC | – | 5000 | 5000 | 5000 |
Torque Constant | 0.526 Nm/Arms | 0.91 Nm/Arms | 0.91 Nm/Arms | 0.91 Nm/Arms |
Voltage Constant | 31.8 Vrms/Krpm | 55 Vrms/Krpm | 55 Vrms/Krpm | 55 Vrms/Krpm |
Winding resistance | 1.1 Ω | 2.9 Ω | 1.17 Ω | 0.69 Ω |
Winding inductance | 4.44 mH | 13.28 mH | 6.33 mH | 4.22 mH |
Electrical time constant | 4.03 ms | 4.58 ms | 5.41 ms | 6.12 ms |
Thermal Resistance | 1 °C/W | 1 °C/W | 0.95 °C/W | 0.78 °C/W |
Mechanical time constant | 0.92 ms | 0.81 ms | 0.62 ms | 0.51 ms |
Rotor Inertia without brake and without feedback | 1.55 kg·cm² | 1.55 kg·cm² | 2.91 kg·cm² | 4.1 kg·cm² |
Mass without holding brake | 3.9 Kg | 3.9 Kg | 5.6 Kg | 7.3 Kg |
Mass with holding brake | 5.2 Kg | 5.2 Kg | 6.9 Kg | 8.6 Kg |
Maximum axial shaft load applied on the shaft’s center | 225 N | 225 N | 225 N | 225 N |
Maximun radial shaft load applied on the shaft’s center | 626 N | 626 N | 626 N | 626 N |
Family Specification | TC 100 |
---|---|
Time Rating | Continuous |
Insulation Class | F |
Enclosure | Totally enclosed. Self-cooled |
Protection Class | IP 65 standard on the body |
Insulation System UL/CSA | cURus , DV155J File nr. : E216686 |
Ambient Temperature | 0 to 40 °C |
Ambient Humidity | 5 to 85% (non-condensing) % |
Poles | 8 |
Thermal Protection | PT 1000 |
Certification | CE |
Recommendation | Rated Output with 300 x 300 x 6 mm aluminum heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing |
Family Overview | TC 100 |
---|---|
Flange dimensions | 100 mm |
Rated Output Power | 820 – 1570 Watt |
Rated Torque | 2,61 – 5,0 Nm |
Rated Speed | 3000 rpm |
Technische Angaben dienen als Orientierungswerte, da die einzelnen Antriebe und Motoren anwendungsbezogen konfiguriert werden. Technische und optische Änderungen vorbehalten.
Specification | TC 100 3,2 21 |
---|---|
Continous Stall Torque | 3.2 Nm |
Peak Torque | 11 Nm |
Nominal Torque | 2.61 Nm |
Rated Voltage | 230 V |
Nominal power | 820 W |
Continuous stall Current | 6.08 Arms |
Maximun Current | 20.91 Arms |
Nominal Current | 5.11 Arms |
Nominal working Speed | 3000 rpm |
Maximum working speed 230VAC | 5000 rpm |
Maximum working speed 400VAC | – |
Torque Constant | 0.526 Nm/Arms |
Voltage Constant | 31.8 Vrms/Krpm |
Winding resistance | 1.1 Ω |
Winding inductance | 4.44 mH |
Electrical time constant | 4.03 ms |
Thermal Resistance | 1 °C/W |
Mechanical time constant | 0.92 ms |
Rotor Inertia without brake and without feedback | 1.55 kg·cm² |
Mass without holding brake | 3.9 Kg |
Mass with holding brake | 5.2 Kg |
Maximum axial shaft load applied on the shaft’s center | 225 N |
Maximun radial shaft load applied on the shaft’s center | 626 N |
Family Specification | TC 100 3,2 21 |
---|---|
Time Rating | Continuous |
Insulation Class | F |
Enclosure | Totally enclosed. Self-cooled |
Protection Class | IP 65 standard on the body |
Insulation System UL/CSA | cURus , DV155J File nr. : E216686 |
Ambient Temperature | 0 to 40 °C |
Ambient Humidity | 5 to 85% (non-condensing) % |
Poles | 8 |
Thermal Protection | PT 1000 |
Certification | CE |
Recommendation | Rated Output with 300 x 300 x 6 mm aluminum heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing |
Family Overview | TC 100 3,2 21 |
---|---|
Flange dimensions | 100 mm |
Rated Output Power | 820 – 1570 Watt |
Rated Torque | 2,61 – 5,0 Nm |
Rated Speed | 3000 rpm |
Technische Angaben dienen als Orientierungswerte, da die einzelnen Antriebe und Motoren anwendungsbezogen konfiguriert werden. Technische und optische Änderungen vorbehalten.
Specification | TC 100 3,2 15 |
---|---|
Continous Stall Torque | 3.2 Nm |
Peak Torque | 11 Nm |
Nominal Torque | 2.61 Nm |
Rated Voltage | 400 V |
Nominal power | 820 W |
Continuous stall Current | 3.52 Arms |
Maximun Current | 12.09 Arms |
Nominal Current | 2.96 Arms |
Nominal working Speed | 3000 rpm |
Maximum working speed 230VAC | 3900 rpm |
Maximum working speed 400VAC | 5000 |
Torque Constant | 0.91 Nm/Arms |
Voltage Constant | 55 Vrms/Krpm |
Winding resistance | 2.9 Ω |
Winding inductance | 13.28 mH |
Electrical time constant | 4.58 ms |
Thermal Resistance | 1 °C/W |
Mechanical time constant | 0.81 ms |
Rotor Inertia without brake and without feedback | 1.55 kg·cm² |
Mass without holding brake | 3.9 Kg |
Mass with holding brake | 5.2 Kg |
Maximum axial shaft load applied on the shaft’s center | 225 N |
Maximun radial shaft load applied on the shaft’s center | 626 N |
Family Specification | TC 100 3,2 15 |
---|---|
Time Rating | Continuous |
Insulation Class | F |
Enclosure | Totally enclosed. Self-cooled |
Protection Class | IP 65 standard on the body |
Insulation System UL/CSA | cURus , DV155J File nr. : E216686 |
Ambient Temperature | 0 to 40 °C |
Ambient Humidity | 5 to 85% (non-condensing) % |
Poles | 8 |
Thermal Protection | PT 1000 |
Certification | CE |
Recommendation | Rated Output with 300 x 300 x 6 mm aluminum heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing |
Family Overview | TC 100 3,2 15 |
---|---|
Flange dimensions | 100 mm |
Rated Output Power | 820 – 1570 Watt |
Rated Torque | 2,61 – 5,0 Nm |
Rated Speed | 3000 rpm |
Technische Angaben dienen als Orientierungswerte, da die einzelnen Antriebe und Motoren anwendungsbezogen konfiguriert werden. Technische und optische Änderungen vorbehalten.
Specification | TC 100 5,6 15 |
---|---|
Continous Stall Torque | 5.6 Nm |
Peak Torque | 22 Nm |
Nominal Torque | 4.2 Nm |
Rated Voltage | 400 V |
Nominal power | 1320 W |
Continuous stall Current | 6.15 Arms |
Maximun Current | 24.18 Arms |
Nominal Current | 4.76 Arms |
Nominal working Speed | 3000 rpm |
Maximum working speed 230VAC | 3900 rpm |
Maximum working speed 400VAC | 5000 |
Torque Constant | 0.91 Nm/Arms |
Voltage Constant | 55 Vrms/Krpm |
Winding resistance | 1.17 Ω |
Winding inductance | 6.33 mH |
Electrical time constant | 5.41 ms |
Thermal Resistance | 0.95 °C/W |
Mechanical time constant | 0.62 ms |
Rotor Inertia without brake and without feedback | 2.91 kg·cm² |
Mass without holding brake | 5.6 Kg |
Mass with holding brake | 6.9 Kg |
Maximum axial shaft load applied on the shaft’s center | 225 N |
Maximun radial shaft load applied on the shaft’s center | 626 N |
Family Specification | TC 100 5,6 15 |
---|---|
Time Rating | Continuous |
Insulation Class | F |
Enclosure | Totally enclosed. Self-cooled |
Protection Class | IP 65 standard on the body |
Insulation System UL/CSA | cURus , DV155J File nr. : E216686 |
Ambient Temperature | 0 to 40 °C |
Ambient Humidity | 5 to 85% (non-condensing) % |
Poles | 8 |
Thermal Protection | PT 1000 |
Certification | CE |
Recommendation | Rated Output with 300 x 300 x 6 mm aluminum heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing |
Family Overview | TC 100 5,6 15 |
---|---|
Flange dimensions | 100 mm |
Rated Output Power | 820 – 1570 Watt |
Rated Torque | 2,61 – 5,0 Nm |
Rated Speed | 3000 rpm |
Technische Angaben dienen als Orientierungswerte, da die einzelnen Antriebe und Motoren anwendungsbezogen konfiguriert werden. Technische und optische Änderungen vorbehalten.
Specification | TC 100 8 15 |
---|---|
Continous Stall Torque | 8 Nm |
Peak Torque | 33 Nm |
Nominal Torque | 5 Nm |
Rated Voltage | 400 V |
Nominal power | 1570 W |
Continuous stall Current | 8.79 Arms |
Maximun Current | 36.27 Arms |
Nominal Current | 5.66 Arms |
Nominal working Speed | 3000 rpm |
Maximum working speed 230VAC | 3900 rpm |
Maximum working speed 400VAC | 5000 |
Torque Constant | 0.91 Nm/Arms |
Voltage Constant | 55 Vrms/Krpm |
Winding resistance | 0.69 Ω |
Winding inductance | 4.22 mH |
Electrical time constant | 6.12 ms |
Thermal Resistance | 0.78 °C/W |
Mechanical time constant | 0.51 ms |
Rotor Inertia without brake and without feedback | 4.1 kg·cm² |
Mass without holding brake | 7.3 Kg |
Mass with holding brake | 8.6 Kg |
Maximum axial shaft load applied on the shaft’s center | 225 N |
Maximun radial shaft load applied on the shaft’s center | 626 N |
Family Specification | TC 100 8 15 |
---|---|
Time Rating | Continuous |
Insulation Class | F |
Enclosure | Totally enclosed. Self-cooled |
Protection Class | IP 65 standard on the body |
Insulation System UL/CSA | cURus , DV155J File nr. : E216686 |
Ambient Temperature | 0 to 40 °C |
Ambient Humidity | 5 to 85% (non-condensing) % |
Poles | 8 |
Thermal Protection | PT 1000 |
Certification | CE |
Recommendation | Rated Output with 300 x 300 x 6 mm aluminum heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing |
Family Overview | TC 100 8 15 |
---|---|
Flange dimensions | 100 mm |
Rated Output Power | 820 – 1570 Watt |
Rated Torque | 2,61 – 5,0 Nm |
Rated Speed | 3000 rpm |
Technische Angaben dienen als Orientierungswerte, da die einzelnen Antriebe und Motoren anwendungsbezogen konfiguriert werden. Technische und optische Änderungen vorbehalten.