Specification
| Parameter | Unit | TC 100 3,2 21 | TC 100 3,2 15 | TC 100 5,6 15 | TC 100 8 15 |
|---|---|---|---|---|---|
| Continuous stall torque | Nm | 3.2 | 3.2 | 5.6 | 8 |
| Maximum working speed 230VAC | rpm | 5000 | 3900 | 3900 | 3900 |
| Maximum working speed 400VAC | – | 5000 | 5000 | 5000 | |
| Torque Constant | Nm/Arms | 0.526 | 0.91 | 0.91 | 0.91 |
| Voltage constant | Vrms/Krpm | 31.8 | 55 | 55 | 55 |
| Winding resistance | Ω | 1.1 | 2.9 | 1.17 | 0.69 |
| Winding inductance | mH | 4.44 | 13.28 | 6.33 | 4.22 |
| Electrical time constant | ms | 4.03 | 4.58 | 5.41 | 6.12 |
| Thermal resistance | °C/W | 1 | 1 | 0.95 | 0.78 |
| Mechanical time constant | ms | 0.92 | 0.81 | 0.62 | 0.51 |
| Rotor Inertia without brake and without feedback | kg·cm² | 1.55 | 1.55 | 2.91 | 4.1 |
| Peak Torque | Nm | 11 | 11 | 22 | 33 |
| Mass without holding brake | Kg | 3.9 | 3.9 | 5.6 | 7.3 |
| Mass with holding brake | Kg | 5.2 | 5.2 | 6.9 | 8.6 |
| Maximum axial shaft load applied on the shaft’s center | N | 225 | 225 | 225 | 225 |
| Maximun radial shaft load applied on the shaft’s center | N | 626 | 626 | 626 | 626 |
| Motor length (without brake) | mm | 91 | 91 | 109 | 109 |
| Motor length (with brake) | mm | 122 | 122 | 140 | 140 |
| Nominal torque | Nm | 2.61 | 2.61 | 4.2 | 5 |
| Rated voltage | V | 230 | 400 | 400 | 400 |
| Nominal power | W | 820 | 820 | 1320 | 1570 |
| Continuous stall current | Arms | 6.08 | 3.52 | 6.15 | 8.79 |
| Maximun Current | Arms | 20.91 | 12.09 | 24.18 | 36.27 |
| Nominal current | Arms | 5.11 | 2.96 | 4.76 | 5.66 |
| Nominal speed | rpm | 3000 | 3000 | 3000 | 3000 |
Family Specification
| Family Specification | Unit | TC 100 |
|---|---|---|
| Time Rating | Continuous | |
| Certification | CE | |
| Recommendation | Rated Output with 300 x 300 x 6 mm aluminum heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 |
Family Overview
| Family Overview | Unit | TC 100 |
|---|---|---|
| Flange dimensions | mm | 100 |
| Rated Output Power | Watt | 820 – 1570 |
| Rated Torque | Nm | 2,61 – 5,0 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
TC 100
datasheet
| Parameter | Unit | TC 100 3,2 21 |
|---|---|---|
| Continuous stall torque | Nm | 3.2 |
| Maximum working speed 230VAC | rpm | 5000 |
| Maximum working speed 400VAC | – | |
| Torque Constant | Nm/Arms | 0.526 |
| Voltage constant | Vrms/Krpm | 31.8 |
| Winding resistance | Ω | 1.1 |
| Winding inductance | mH | 4.44 |
| Electrical time constant | ms | 4.03 |
| Thermal resistance | °C/W | 1 |
| Mechanical time constant | ms | 0.92 |
| Rotor Inertia without brake and without feedback | kg·cm² | 1.55 |
| Peak Torque | Nm | 11 |
| Mass without holding brake | Kg | 3.9 |
| Mass with holding brake | Kg | 5.2 |
| Maximum axial shaft load applied on the shaft’s center | N | 225 |
| Maximun radial shaft load applied on the shaft’s center | N | 626 |
| Motor length (without brake) | mm | 91 |
| Motor length (with brake) | mm | 122 |
| Nominal torque | Nm | 2.61 |
| Rated voltage | V | 230 |
| Nominal power | W | 820 |
| Continuous stall current | Arms | 6.08 |
| Maximun Current | Arms | 20.91 |
| Nominal current | Arms | 5.11 |
| Nominal speed | rpm | 3000 |
Family Specification
| Family Specification | Unit | TC 100 3,2 21 |
|---|---|---|
| Time Rating | Continuous | |
| Certification | CE | |
| Recommendation | Rated Output with 300 x 300 x 6 mm aluminum heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 |
Family Overview
| Family Overview | Unit | TC 100 3,2 21 |
|---|---|---|
| Flange dimensions | mm | 100 |
| Rated Output Power | Watt | 820 – 1570 |
| Rated Torque | Nm | 2,61 – 5,0 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
TC 100
datasheet
| Parameter | Unit | TC 100 3,2 15 |
|---|---|---|
| Continuous stall torque | Nm | 3.2 |
| Maximum working speed 230VAC | rpm | 3900 |
| Maximum working speed 400VAC | 5000 | |
| Torque Constant | Nm/Arms | 0.91 |
| Voltage constant | Vrms/Krpm | 55 |
| Winding resistance | Ω | 2.9 |
| Winding inductance | mH | 13.28 |
| Electrical time constant | ms | 4.58 |
| Thermal resistance | °C/W | 1 |
| Mechanical time constant | ms | 0.81 |
| Rotor Inertia without brake and without feedback | kg·cm² | 1.55 |
| Peak Torque | Nm | 11 |
| Mass without holding brake | Kg | 3.9 |
| Mass with holding brake | Kg | 5.2 |
| Maximum axial shaft load applied on the shaft’s center | N | 225 |
| Maximun radial shaft load applied on the shaft’s center | N | 626 |
| Motor length (without brake) | mm | 91 |
| Motor length (with brake) | mm | 122 |
| Nominal torque | Nm | 2.61 |
| Rated voltage | V | 400 |
| Nominal power | W | 820 |
| Continuous stall current | Arms | 3.52 |
| Maximun Current | Arms | 12.09 |
| Nominal current | Arms | 2.96 |
| Nominal speed | rpm | 3000 |
Family Specification
| Family Specification | Unit | TC 100 3,2 15 |
|---|---|---|
| Time Rating | Continuous | |
| Certification | CE | |
| Recommendation | Rated Output with 300 x 300 x 6 mm aluminum heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 |
Family Overview
| Family Overview | Unit | TC 100 3,2 15 |
|---|---|---|
| Flange dimensions | mm | 100 |
| Rated Output Power | Watt | 820 – 1570 |
| Rated Torque | Nm | 2,61 – 5,0 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
TC 100
datasheet
| Parameter | Unit | TC 100 5,6 15 |
|---|---|---|
| Continuous stall torque | Nm | 5.6 |
| Maximum working speed 230VAC | rpm | 3900 |
| Maximum working speed 400VAC | 5000 | |
| Torque Constant | Nm/Arms | 0.91 |
| Voltage constant | Vrms/Krpm | 55 |
| Winding resistance | Ω | 1.17 |
| Winding inductance | mH | 6.33 |
| Electrical time constant | ms | 5.41 |
| Thermal resistance | °C/W | 0.95 |
| Mechanical time constant | ms | 0.62 |
| Rotor Inertia without brake and without feedback | kg·cm² | 2.91 |
| Peak Torque | Nm | 22 |
| Mass without holding brake | Kg | 5.6 |
| Mass with holding brake | Kg | 6.9 |
| Maximum axial shaft load applied on the shaft’s center | N | 225 |
| Maximun radial shaft load applied on the shaft’s center | N | 626 |
| Motor length (without brake) | mm | 109 |
| Motor length (with brake) | mm | 140 |
| Nominal torque | Nm | 4.2 |
| Rated voltage | V | 400 |
| Nominal power | W | 1320 |
| Continuous stall current | Arms | 6.15 |
| Maximun Current | Arms | 24.18 |
| Nominal current | Arms | 4.76 |
| Nominal speed | rpm | 3000 |
Family Specification
| Family Specification | Unit | TC 100 5,6 15 |
|---|---|---|
| Time Rating | Continuous | |
| Certification | CE | |
| Recommendation | Rated Output with 300 x 300 x 6 mm aluminum heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 |
Family Overview
| Family Overview | Unit | TC 100 5,6 15 |
|---|---|---|
| Flange dimensions | mm | 100 |
| Rated Output Power | Watt | 820 – 1570 |
| Rated Torque | Nm | 2,61 – 5,0 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
TC 100
datasheet
| Parameter | Unit | TC 100 8 15 |
|---|---|---|
| Continuous stall torque | Nm | 8 |
| Maximum working speed 230VAC | rpm | 3900 |
| Maximum working speed 400VAC | 5000 | |
| Torque Constant | Nm/Arms | 0.91 |
| Voltage constant | Vrms/Krpm | 55 |
| Winding resistance | Ω | 0.69 |
| Winding inductance | mH | 4.22 |
| Electrical time constant | ms | 6.12 |
| Thermal resistance | °C/W | 0.78 |
| Mechanical time constant | ms | 0.51 |
| Rotor Inertia without brake and without feedback | kg·cm² | 4.1 |
| Peak Torque | Nm | 33 |
| Mass without holding brake | Kg | 7.3 |
| Mass with holding brake | Kg | 8.6 |
| Maximum axial shaft load applied on the shaft’s center | N | 225 |
| Maximun radial shaft load applied on the shaft’s center | N | 626 |
| Motor length (without brake) | mm | 109 |
| Motor length (with brake) | mm | 140 |
| Nominal torque | Nm | 5 |
| Rated voltage | V | 400 |
| Nominal power | W | 1570 |
| Continuous stall current | Arms | 8.79 |
| Maximun Current | Arms | 36.27 |
| Nominal current | Arms | 5.66 |
| Nominal speed | rpm | 3000 |
Family Specification
| Family Specification | Unit | TC 100 8 15 |
|---|---|---|
| Time Rating | Continuous | |
| Certification | CE | |
| Recommendation | Rated Output with 300 x 300 x 6 mm aluminum heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 |
Family Overview
| Family Overview | Unit | TC 100 8 15 |
|---|---|---|
| Flange dimensions | mm | 100 |
| Rated Output Power | Watt | 820 – 1570 |
| Rated Torque | Nm | 2,61 – 5,0 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.