Beschreibung
Flange dimensions: 115 mm
Rated Output Power: 840 – 2300 W
Rated Torque: 2,7 – 7,3 Nm
Rated Speed: 3000 rpm
Loggen Sie sich ein, um Preise für dieses Produkt zu sehen
inkl. 19 % MwSt.
Flange dimensions: 115 mm
Rated Output Power: 840 – 2300 W
Rated Torque: 2,7 – 7,3 Nm
Rated Speed: 3000 rpm
Flange dimensions: 115 mm
Rated Output Power: 840 – 2300 W
Rated Torque: 2,7 – 7,3 Nm
Rated Speed: 3000 rpm
Specification | T 115 7 15 |
---|---|
Continous Stall Torque | 6.5 Nm |
Peak Torque | 21 Nm |
Nominal Torque | 5.3 Nm |
Rated Voltage | 230 V |
Nominal power | 1650 W |
Continuous stall Current | 7.1 Arms |
Maximun Current | 23.1 Arms |
Nominal Current | 6.1 Arms |
Nominal working Speed | 3000 rpm |
Maximum working speed 24VDC | 3900 rpm |
Maximum working speed 230VAC | – |
Maximum working speed 400VAC | 4500 |
Torque Constant | 0.91 Nm/Arms |
Voltage Constant | 55 Vrms/Krpm |
Winding resistance | 1.2 Ω |
Winding inductance | 4.1 mH |
Electrical time constant | 3.4 ms |
Thermal Resistance | 0.74 °C/W |
Mechanical timeconstant high rotor inertia | 3.1 ms |
Mechanical time constant low rotor inertia | 1.9 ms |
High rotor inertia (as an option) without brake and without feedback | 14.1 kg·cm² |
Low rotor inertia (as an option) without brake and without feedback | 8.8 kg·cm² |
Low rotor inertia (standard) without brake and without feedback | – |
Mass without holding brake | 7.5 Kg |
Mass with holding brake | 8.7 Kg |
Maximum axial shaft load applied on the shaft’s center | 180 N |
Maximun radial shaft load applied on the shaft’s center | 600 N |
Family Specification | T 115 7 15 |
---|---|
Time Rating | Continuous |
Insulation Class | F |
Enclosure | Totally enclosed. Self-cooled |
Protection Class | IP 65 standard on the body |
Insulation System UL/CSA | cURus , DV155J File nr. : E216686 |
Ambient Temperature | 0 to 40 °C |
Ambient Humidity | 5 to 85% (non-condensing) % |
Poles | 6 |
Thermal Protection | PT 1000 |
Certification | CE |
Recommendation | Rated output with 350 x 350 x 20 mm metallic heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing |
Family Overview | T 115 7 15 |
---|---|
Flange dimensions | 115 mm |
Rated Output Power | 840 – 2300 Watt |
Rated Torque | 2,7 – 7,3 Nm |
Rated Speed | 3000 rpm |
Technische Angaben dienen als Orientierungswerte, da die einzelnen Antriebe und Motoren anwendungsbezogen konfiguriert werden. Technische und optische Änderungen vorbehalten.