Description
MDrive Plus NEMA size 34 (85 mm) Speed Control with SPI for parameterization.
Holding torque range oz-in (N-cm): 408 … 1090 (288 … 770)
I/O connector options: Flying Leads, Wire Crimp
Com connector: IDC, Wire Crimp
incl. 19% VAT
MDO1 NEMA 34 with
MDrive Plus NEMA size 34 (85 mm) Speed Control with SPI for parameterization.
Holding torque range oz-in (N-cm): 408 … 1090 (288 … 770)
I/O connector options: Flying Leads, Wire Crimp
Com connector: IDC, Wire Crimp
Specification | MDO1 NEMA 34 Speed Control IP20 |
---|---|
Control type | Step Control |
Feature set | Standard (Plus) |
P1 connector options | Flying Leads, Pluggable Power & I/O |
P2 connector options | IDC, Wire Crimp Comm |
Communications interface | SPI |
NEMA size | 34 (85×85 mm) |
Holding torque range | 2.88 … 7.70 Nm |
Temperature heatsink (short-time) | max. 75 °C |
IP rating | IP20 |
Input voltage | +12 to +75 +VDC |
Power supply current requirement | 4.0 A |
Aux-logic supply voltage | 12 … 24 +VDC |
Aux-Logic Supply Current | 194 mA max |
I/O Specifications | MDO1 NEMA 34 Speed Control IP20 |
---|---|
I/O functions | Programmable I/Os |
# of I/O | 4 I/O points, programmable as sinking outputs or sinking and sourcing inputs |
Logic Range | Inputs and outputs tolerant to +24 VDC, inputs TTL compatible |
Output Sink Current | Up to 600 mA per channel |
Isoation | None |
Protection | Over temp, short circuit, transient over voltage, over voltage, inductive clamp |
Dedicated I/O function | Caputure input, trip output |
Logic range | 0 to +5 VDC, TTL compatible |
Analog input resolution | 10 Bits |
Range (selectable) | 0 to +5 VDC, 0 to 10 VDC, 0 to 20 mA, 4 to 20 mA |
Parameter settings | MDO1 NEMA 34 Speed Control IP20 |
---|---|
Counter type | Position and Encoder |
Counter Resolution | 32 Bits |
Counter edge rate | 5 MHz |
Velocity range | ± 5,000.000 steps/sec |
Velocity resolution | 0.5961 steps/sec |
Accel/Decel range | 1.5 X 10^9 steps/sec2 |
Accel/Decel resolution | 90.9 steps/sec2 |
Open Loop / Absolute Encoder | MDO1 NEMA 34 Speed Control IP20 |
---|---|
Microstep resolution | 20 # of settings |
Microstep resolution | 200 … 51200 Range steps/rev |
Encoder type | Internal, differential, magnetic |
Encoder resolution | 512 lines (2048 edges) |
Steps/Rev | 51200 |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.