Beschreibung
The size 20mm is our smallest PM Stepper Linear Actuator. External, Non-Captive and Kaptive versions are available. Various screw end machining and length customization is optional.
Loggen Sie sich ein, um Preise für dieses Produkt zu sehen
The size 20mm is our smallest PM Stepper Linear Actuator. External, Non-Captive and Kaptive versions are available. Various screw end machining and length customization is optional.
The size 20mm is our smallest PM Stepper Linear Actuator. External, Non-Captive and Kaptive versions are available. Various screw end machining and length customization is optional.
Parameter | Unit | 20mm Frame |
---|---|---|
Polarity | Bi-Polar | |
Linear Actuator Type | External, Non-captive, Kaptive | |
Step Angle | 7.5°/15° | |
Winding | mA | 5/12 |
Phase Current | mA | 370/160 |
Phase Resistance | Ohm | 13.5/74.5 |
Phase Inductance | mH | 6.5/36/4/25 |
Power Consumption | W | 3.4 |
Rotor Inertia | g·cm² | 1.05 |
Insulation Class | B | |
Insulation Resistance | MΩ | 100 |
Mass | g | 35 |
Bearing | Ball Bearing |
Lead Screw Code | Unit | PMSLA – Size 20mm |
---|---|---|
AA, Screw Lead | mm | 0.6096 |
B, Screw Lead | mm | 1.2192 |
J, Screw Lead | mm | 2.4384 |
Technische Angaben dienen als Orientierungswerte, da die einzelnen Antriebe und Motoren anwendungsbezogen konfiguriert werden. Technische und optische Änderungen vorbehalten.
Parameter | Unit | 20mm Frame |
---|---|---|
Polarity | Bi-Polar | |
Linear Actuator Type | External, Non-captive, Kaptive | |
Step Angle | 7.5°/15° | |
Winding | mA | 5/12 |
Phase Current | mA | 370/160 |
Phase Resistance | Ohm | 13.5/74.5 |
Phase Inductance | mH | 6.5/36/4/25 |
Power Consumption | W | 3.4 |
Rotor Inertia | g·cm² | 1.05 |
Insulation Class | B | |
Insulation Resistance | MΩ | 100 |
Mass | g | 35 |
Bearing | Ball Bearing |
Lead Screw Code | Unit | 20mm Frame |
---|---|---|
AA, Screw Lead | mm | 0.6096 |
B, Screw Lead | mm | 1.2192 |
J, Screw Lead | mm | 2.4384 |
Technische Angaben dienen als Orientierungswerte, da die einzelnen Antriebe und Motoren anwendungsbezogen konfiguriert werden. Technische und optische Änderungen vorbehalten.