Description
Flange dimensions: 130 mm
Rated Output Power: 500 – 2000 W
Rated Torque: 2,39 – 9,55 Nm
TC-E 130 5A F1 2
Flange dimensions: 130 mm
Rated Output Power: 500 – 2000 W
Rated Torque: 2,39 – 9,55 Nm
| Parameter | Unit | TC-E 130 5A F1 2 |
|---|---|---|
| Continuous Stall Torque | Nm | 2.39 |
| Peak Torque | Nm | 7.16 |
| Nominal working Speed | rpm | 2000 |
| Maximum working speed | rpm | 3000 |
| Nominal Torque | Nm | 2.39 |
| Nominal Current | Arms | 3.24 |
| Nominal Power | kW | 0.5 |
| Rated winding voltage | Vac | 230 |
| Maximum winding voltage | Vdc | 360 |
| Maximum voltage to ground | Vac | 255 |
| Maximum current | Arms | 9.5 |
| Continuous Stall current | Arms | 2.89 |
| Voltage Constant | Vrms/Krpm | 50 |
| Torque Constant | Nm/Arms | 0.83 |
| Winding resistance | Ohm | 0.74 |
| Winding inductance qu-v | mH | 7.84 |
| Winding inductance du-v | mH | 7.14 |
| Rotor inertia without holding brake | kg·cm² | 6.62 |
| Rotor inertia with holding brake | kg·cm² | 6.9 |
| Rotor high inertia without holding brake | – | |
| Rotor high inertia with holding brake | – | |
| Mass without holding brake | Kg | 7 |
| Mass with holding brake | Kg | 8.2 |
| High inertia mass without holding brake | – | |
| High inertia mass with holding brake | – | |
| Thermal time constant | min | 30 |
| Maximum radial shaft load | N | 670 |
| Maximum axial shaft load | N | 200 |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.