incl. 19% VAT
Flange dimensions: 40 mm
Rated Output Power: 60 – 100 W
Rated Torque: 0,19 – 0,32 Nm
Rated Speed: 3000 rpm
Flange dimensions: 40 mm
Rated Output Power: 60 – 100 W
Rated Torque: 0,19 – 0,32 Nm
Rated Speed: 3000 rpm
| Specification | TC 40 0,32 21 |
|---|---|
| Continous Stall Torque | 0.34 Nm |
| Peak Torque | 0.96 Nm |
| Nominal Torque | 0.32 Nm |
| Rated Voltage | 230 V |
| Nominal power | 100 W |
| Continuous stall Current | 0.65 Arms |
| Maximun Current | 1.82 Arms |
| Nominal Current | 0.62 Arms |
| Nominal working Speed | 3000 rpm |
| Maximum working speed 24VDC | – |
| Maximum working speed 48VDC | – |
| Maximum working speed 230VAC | 5000 rpm |
| Torque Constant | 0.526 Nm/Arms |
| Voltage Constant | 31.8 Vrms/Krpm |
| Winding resistance | 36.2 Ω |
| Winding inductance | 44 mH |
| Electrical time constant | 1.21 ms |
| Thermal Resistance | 2.3 °C/W |
| Mechanical time constant | 0.92 ms |
| Rotor Inertia without brake and without feedback | 0.047 kg·cm² |
| Mass without holding brake | 0.54 Kg |
| Mass with holding brake | 0.68 Kg |
| Mass without holding brake with absolute encoder | 0.55 Kg |
| Mass with holding brake with absolute encoder | 0.75 Kg |
| Maximum axial shaft load applied on the shaft’s center | 30 N |
| Maximun radial shaft load applied on the shaft’s center | 180 N |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
