Specification
| Parameter | Unit | TC 40 0,16 32 | TC 40 0,16 01 | TC 40 0,32 01 | TC 40 0,32 21 |
|---|---|---|---|---|---|
| Continuous stall torque | Nm | 0.21 | 0.21 | 0.34 | 0.34 |
| Maximum working speed 24VDC | rpm | 5000 | – | – | – |
| Maximum working speed 48VDC | rpm | – | 5000 | 5000 | – |
| Maximum working speed 230VAC | rpm | – | – | – | 5000 |
| Torque Constant | Nm/Arms | 0.05 | 0.094 | 0.094 | 0.526 |
| Voltage constant | Vrms/Krpm | 3 | 5.7 | 5.7 | 31.8 |
| Winding resistance | Ω | 1 | 3.2 | 1.1 | 36.2 |
| Winding inductance | mH | 0.7 | 2.5 | 1.42 | 44 |
| Electrical time constant | ms | 0.7 | 0.78 | 1.29 | 1.21 |
| Thermal resistance | °C/W | 2.38 | 2.38 | 2.3 | 2.3 |
| Mechanical time constant | ms | 1.62 | 1.47 | 0.88 | 0.92 |
| Peak Torque | Nm | 0.48 | 0.48 | 0.96 | 0.96 |
| Rotor Inertia without brake and without feedback | kg·cm² | 0.027 | 0.027 | 0.047 | 0.047 |
| Mass without holding brake | Kg | 0.4 | 0.4 | 0.54 | 0.54 |
| Mass with holding brake | Kg | 0.54 | 0.54 | 0.68 | 0.68 |
| Mass without holding brake with absolute encoder | Kg | 0.41 | 0.41 | 0.55 | 0.55 |
| Mass with holding brake with absolute encoder | Kg | 0.61 | 0.61 | 0.75 | 0.75 |
| Maximum axial shaft load applied on the shaft’s center | N | 30 | 30 | 30 | 30 |
| Maximun radial shaft load applied on the shaft’s center | N | 180 | 180 | 180 | 180 |
| Motor length (without brake) | mm | 91 | 91 | 109 | 109 |
| Motor length (with brake) | mm | 122 | 122 | 140 | 140 |
| Nominal torque | Nm | 0.19 | 0.19 | 0.32 | 0.32 |
| Rated voltage | V | 24 | 48 | 48 | 230 |
| Nominal power | W | 60 | 60 | 100 | 100 |
| Continuous stall current | Arms | 4.23 | 2.23 | 3.61 | 0.65 |
| Maximun Current | Arms | 9.67 | 5.09 | 10.18 | 1.82 |
| Nominal current | Arms | 3.96 | 2.09 | 3.48 | 0.62 |
| Nominal speed | rpm | 3000 | 3000 | 3000 | 3000 |
Family Specification
| Family Specification | Unit | TC 40 |
|---|---|---|
| Time Rating | Continuous | |
| Certification | CE | |
| Recommendation | Rated output with 250 x 250 x 6 mm metallic heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | Not available |
Family Overview
| Family Overview | Unit | TC 40 |
|---|---|---|
| Flange dimensions | mm | 40 |
| Rated Output Power | Watt | 60 – 100 |
| Rated Torque | Nm | 0,19 – 0,32 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
| Parameter | Unit | TC 40 0,16 32 |
|---|---|---|
| Continuous stall torque | Nm | 0.21 |
| Maximum working speed 24VDC | rpm | 5000 |
| Maximum working speed 48VDC | rpm | – |
| Maximum working speed 230VAC | rpm | – |
| Torque Constant | Nm/Arms | 0.05 |
| Voltage constant | Vrms/Krpm | 3 |
| Winding resistance | Ω | 1 |
| Winding inductance | mH | 0.7 |
| Electrical time constant | ms | 0.7 |
| Thermal resistance | °C/W | 2.38 |
| Mechanical time constant | ms | 1.62 |
| Peak Torque | Nm | 0.48 |
| Rotor Inertia without brake and without feedback | kg·cm² | 0.027 |
| Mass without holding brake | Kg | 0.4 |
| Mass with holding brake | Kg | 0.54 |
| Mass without holding brake with absolute encoder | Kg | 0.41 |
| Mass with holding brake with absolute encoder | Kg | 0.61 |
| Maximum axial shaft load applied on the shaft’s center | N | 30 |
| Maximun radial shaft load applied on the shaft’s center | N | 180 |
| Motor length (without brake) | mm | 91 |
| Motor length (with brake) | mm | 122 |
| Nominal torque | Nm | 0.19 |
| Rated voltage | V | 24 |
| Nominal power | W | 60 |
| Continuous stall current | Arms | 4.23 |
| Maximun Current | Arms | 9.67 |
| Nominal current | Arms | 3.96 |
| Nominal speed | rpm | 3000 |
Family Specification
| Family Specification | Unit | TC 40 0,16 32 |
|---|---|---|
| Time Rating | Continuous | |
| Certification | CE | |
| Recommendation | Rated output with 250 x 250 x 6 mm metallic heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | Not available |
Family Overview
| Family Overview | Unit | TC 40 0,16 32 |
|---|---|---|
| Flange dimensions | mm | 40 |
| Rated Output Power | Watt | 60 – 100 |
| Rated Torque | Nm | 0,19 – 0,32 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
| Parameter | Unit | TC 40 0,16 01 |
|---|---|---|
| Continuous stall torque | Nm | 0.21 |
| Maximum working speed 24VDC | rpm | – |
| Maximum working speed 48VDC | rpm | 5000 |
| Maximum working speed 230VAC | rpm | – |
| Torque Constant | Nm/Arms | 0.094 |
| Voltage constant | Vrms/Krpm | 5.7 |
| Winding resistance | Ω | 3.2 |
| Winding inductance | mH | 2.5 |
| Electrical time constant | ms | 0.78 |
| Thermal resistance | °C/W | 2.38 |
| Mechanical time constant | ms | 1.47 |
| Peak Torque | Nm | 0.48 |
| Rotor Inertia without brake and without feedback | kg·cm² | 0.027 |
| Mass without holding brake | Kg | 0.4 |
| Mass with holding brake | Kg | 0.54 |
| Mass without holding brake with absolute encoder | Kg | 0.41 |
| Mass with holding brake with absolute encoder | Kg | 0.61 |
| Maximum axial shaft load applied on the shaft’s center | N | 30 |
| Maximun radial shaft load applied on the shaft’s center | N | 180 |
| Motor length (without brake) | mm | 91 |
| Motor length (with brake) | mm | 122 |
| Nominal torque | Nm | 0.19 |
| Rated voltage | V | 48 |
| Nominal power | W | 60 |
| Continuous stall current | Arms | 2.23 |
| Maximun Current | Arms | 5.09 |
| Nominal current | Arms | 2.09 |
| Nominal speed | rpm | 3000 |
Family Specification
| Family Specification | Unit | TC 40 0,16 01 |
|---|---|---|
| Time Rating | Continuous | |
| Certification | CE | |
| Recommendation | Rated output with 250 x 250 x 6 mm metallic heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | Not available |
Family Overview
| Family Overview | Unit | TC 40 0,16 01 |
|---|---|---|
| Flange dimensions | mm | 40 |
| Rated Output Power | Watt | 60 – 100 |
| Rated Torque | Nm | 0,19 – 0,32 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
| Parameter | Unit | TC 40 0,32 01 |
|---|---|---|
| Continuous stall torque | Nm | 0.34 |
| Maximum working speed 24VDC | rpm | – |
| Maximum working speed 48VDC | rpm | 5000 |
| Maximum working speed 230VAC | rpm | – |
| Torque Constant | Nm/Arms | 0.094 |
| Voltage constant | Vrms/Krpm | 5.7 |
| Winding resistance | Ω | 1.1 |
| Winding inductance | mH | 1.42 |
| Electrical time constant | ms | 1.29 |
| Thermal resistance | °C/W | 2.3 |
| Mechanical time constant | ms | 0.88 |
| Peak Torque | Nm | 0.96 |
| Rotor Inertia without brake and without feedback | kg·cm² | 0.047 |
| Mass without holding brake | Kg | 0.54 |
| Mass with holding brake | Kg | 0.68 |
| Mass without holding brake with absolute encoder | Kg | 0.55 |
| Mass with holding brake with absolute encoder | Kg | 0.75 |
| Maximum axial shaft load applied on the shaft’s center | N | 30 |
| Maximun radial shaft load applied on the shaft’s center | N | 180 |
| Motor length (without brake) | mm | 109 |
| Motor length (with brake) | mm | 140 |
| Nominal torque | Nm | 0.32 |
| Rated voltage | V | 48 |
| Nominal power | W | 100 |
| Continuous stall current | Arms | 3.61 |
| Maximun Current | Arms | 10.18 |
| Nominal current | Arms | 3.48 |
| Nominal speed | rpm | 3000 |
Family Specification
| Family Specification | Unit | TC 40 0,32 01 |
|---|---|---|
| Time Rating | Continuous | |
| Certification | CE | |
| Recommendation | Rated output with 250 x 250 x 6 mm metallic heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | Not available |
Family Overview
| Family Overview | Unit | TC 40 0,32 01 |
|---|---|---|
| Flange dimensions | mm | 40 |
| Rated Output Power | Watt | 60 – 100 |
| Rated Torque | Nm | 0,19 – 0,32 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
| Parameter | Unit | TC 40 0,32 21 |
|---|---|---|
| Continuous stall torque | Nm | 0.34 |
| Maximum working speed 24VDC | rpm | – |
| Maximum working speed 48VDC | rpm | – |
| Maximum working speed 230VAC | rpm | 5000 |
| Torque Constant | Nm/Arms | 0.526 |
| Voltage constant | Vrms/Krpm | 31.8 |
| Winding resistance | Ω | 36.2 |
| Winding inductance | mH | 44 |
| Electrical time constant | ms | 1.21 |
| Thermal resistance | °C/W | 2.3 |
| Mechanical time constant | ms | 0.92 |
| Peak Torque | Nm | 0.96 |
| Rotor Inertia without brake and without feedback | kg·cm² | 0.047 |
| Mass without holding brake | Kg | 0.54 |
| Mass with holding brake | Kg | 0.68 |
| Mass without holding brake with absolute encoder | Kg | 0.55 |
| Mass with holding brake with absolute encoder | Kg | 0.75 |
| Maximum axial shaft load applied on the shaft’s center | N | 30 |
| Maximun radial shaft load applied on the shaft’s center | N | 180 |
| Motor length (without brake) | mm | 109 |
| Motor length (with brake) | mm | 140 |
| Nominal torque | Nm | 0.32 |
| Rated voltage | V | 230 |
| Nominal power | W | 100 |
| Continuous stall current | Arms | 0.65 |
| Maximun Current | Arms | 1.82 |
| Nominal current | Arms | 0.62 |
| Nominal speed | rpm | 3000 |
Family Specification
| Family Specification | Unit | TC 40 0,32 21 |
|---|---|---|
| Time Rating | Continuous | |
| Certification | CE | |
| Recommendation | Rated output with 250 x 250 x 6 mm metallic heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | Not available |
Family Overview
| Family Overview | Unit | TC 40 0,32 21 |
|---|---|---|
| Flange dimensions | mm | 40 |
| Rated Output Power | Watt | 60 – 100 |
| Rated Torque | Nm | 0,19 – 0,32 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.