incl. 19% VAT
Flange dimensions: 115 mm
Rated Output Power: 840 – 2300 W
Rated Torque: 2,7 – 7,3 Nm
Rated Speed: 3000 rpm
Flange dimensions: 115 mm
Rated Output Power: 840 – 2300 W
Rated Torque: 2,7 – 7,3 Nm
Rated Speed: 3000 rpm
| Specification | T 115 9,2 15 |
|---|---|
| Continous Stall Torque | 8.5 Nm |
| Peak Torque | 27.6 Nm |
| Nominal Torque | 6.4 Nm |
| Rated Voltage | 230 V |
| Nominal power | 2000 W |
| Continuous stall Current | 9.3 Arms |
| Maximun Current | 30.3 Arms |
| Nominal Current | 7.3 Arms |
| Nominal working Speed | 3000 rpm |
| Maximum working speed 24VDC | – |
| Maximum working speed 230VAC | 3900 rpm |
| Maximum working speed 400VAC | 4500 |
| Torque Constant | 0.91 Nm/Arms |
| Voltage Constant | 55 Vrms/Krpm |
| Winding resistance | 0.9 Ω |
| Winding inductance | 3.1 mH |
| Electrical time constant | 3.4 ms |
| Thermal Resistance | 0.58 °C/W |
| Mechanical timeconstant high rotor inertia | 2.9 ms |
| Mechanical time constant low rotor inertia | 1.8 ms |
| High rotor inertia (as an option) without brake and without feedback | 17.5 kg·cm² |
| Low rotor inertia (as an option) without brake and without feedback | – |
| Low rotor inertia (standard) without brake and without feedback | 10.9 kg·cm² |
| Mass without holding brake | 8.8 Kg |
| Mass with holding brake | 9.9 Kg |
| Maximum axial shaft load applied on the shaft’s center | 180 N |
| Maximun radial shaft load applied on the shaft’s center | 600 N |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
