Specification
| Parameter | Unit | TC-L 80 1,5 01 | TC-L 80 1,5 03 | TC-L 80 2,8 02 |
|---|---|---|---|---|
| Stall torque | Nm | 1.74 | 1.74 | – |
| Rated output power for S1 | W | – | – | 480 |
| Rated Output Power for S2 for intermittent duty S2 T= 10’/20′ | W | – | – | 735 |
| Stall current | Arms | 18.5 | 12.3 | – |
| Stall Current for S1 | Arms | – | – | 17.7 |
| Stall Current for S2 for intermittent duty S2 T= 10’/20′ | Arms | – | – | 24.8 |
| Peak current | Arms | 52.7 | 35.1 | 82 |
| Nominal current | Arms | 16.3 | 11 | – |
| Rated Current for S1 | – | – | 14.3 | |
| Rated Current for S2 for intermittent duty S2 T= 10’/20′ | – | – | 21.7 | |
| Nominal speed | rpm | 3000 | 3000 | 3000 |
| Stall torque for S1 | Nm | – | – | 2 |
| Maximum Speed @48Vdc | rpm | 5000 | 3700 | 4700 |
| Torque Constant (± 5%) | Nm/Arms | 0.094 | 0.141 | 0.113 |
| Voltage constant | Vrms/Krpm | 5.7 | 8.5 | 6.8 |
| Phase resistance | Ω | 0.075 | 0.136 | 0.064 |
| Phase inductance | mH | 0.314 | 0.53 | 0.24 |
| Electrical time constant | ms | 4.2 | 3.9 | 3.75 |
| Thermal resistance | °C/W | 1.67 | 1.67 | 2.13 |
| Mechanical time constant | ms | 0.8 | 0.8 | 0.65 |
| Rotor Inertia without brake and without feedback | kg·cm² | 0.64 | 0.64 | 1.16 |
| Motor weight | Kg | 2.25 | 2.25 | 3.05 |
| Stall torque for S2 for intermittent duty S2 T= 10’/20′ | Nm | – | – | 2.8 |
| Motor weight + Brake | Kg | 2.97 | 2.97 | 3.77 |
| Axial Load applied on the shaft’s center | N | 110 | 110 | 110 |
| Radial Load applied on the shaft’s center | N | 350 | 350 | 350 |
| Motor length (without brake) | mm | 128 | 128 | 153 |
| Motor length (with brake) | mm | 170 | 170 | 195 |
| Peak Torque | Nm | 4.5 | 4.5 | 8.4 |
| Nominal torque | Nm | 1.53 | 1.53 | – |
| Rated torque S1 | Nm | – | – | 1.54 |
| Rated Torque for S2 for intermittent duty S2 T= 10’/20′ | Nm | – | – | 2.34 |
| Rated voltage | Vdc | 48 | 48 | 48 |
| Rated output power | W | 480 | 480 | – |
Family Specification
| Family Specification | Unit | TC-L 80 |
|---|---|---|
| Time Rating | Continuous | |
| Certification | CE | |
| Recommendation | Rated output with 250 x 250 x 6 mm metallic heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Motor Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Ambient Humidity | % | 20 to 80% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 |
Family Overview
| Family Overview | Unit | TC-L 80 |
|---|---|---|
| Flange dimensions | mm | 80 |
| Rated Output Power | Watt | 480 |
| Rated Torque | Nm | 1,53 – 1,54 |
| Rated Speed | rpm | 3000 |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
| Parameter | Unit | TC-L 80 1,5 01 |
|---|---|---|
| Stall torque | Nm | 1.74 |
| Rated output power for S1 | W | – |
| Rated Output Power for S2 for intermittent duty S2 T= 10’/20′ | W | – |
| Stall current | Arms | 18.5 |
| Stall Current for S1 | Arms | – |
| Stall Current for S2 for intermittent duty S2 T= 10’/20′ | Arms | – |
| Peak current | Arms | 52.7 |
| Nominal current | Arms | 16.3 |
| Rated Current for S1 | – | |
| Rated Current for S2 for intermittent duty S2 T= 10’/20′ | – | |
| Nominal speed | rpm | 3000 |
| Stall torque for S1 | Nm | – |
| Maximum Speed @48Vdc | rpm | 5000 |
| Torque Constant (± 5%) | Nm/Arms | 0.094 |
| Voltage constant | Vrms/Krpm | 5.7 |
| Phase resistance | Ω | 0.075 |
| Phase inductance | mH | 0.314 |
| Electrical time constant | ms | 4.2 |
| Thermal resistance | °C/W | 1.67 |
| Mechanical time constant | ms | 0.8 |
| Rotor Inertia without brake and without feedback | kg·cm² | 0.64 |
| Motor weight | Kg | 2.25 |
| Stall torque for S2 for intermittent duty S2 T= 10’/20′ | Nm | – |
| Motor weight + Brake | Kg | 2.97 |
| Axial Load applied on the shaft’s center | N | 110 |
| Radial Load applied on the shaft’s center | N | 350 |
| Motor length (without brake) | mm | 128 |
| Motor length (with brake) | mm | 170 |
| Peak Torque | Nm | 4.5 |
| Nominal torque | Nm | 1.53 |
| Rated torque S1 | Nm | – |
| Rated Torque for S2 for intermittent duty S2 T= 10’/20′ | Nm | – |
| Rated voltage | Vdc | 48 |
| Rated output power | W | 480 |
Family Specification
| Family Specification | Unit | TC-L 80 1,5 01 |
|---|---|---|
| Time Rating | Continuous | |
| Certification | CE | |
| Recommendation | Rated output with 250 x 250 x 6 mm metallic heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Motor Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Ambient Humidity | % | 20 to 80% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 |
Family Overview
| Family Overview | Unit | TC-L 80 1,5 01 |
|---|---|---|
| Flange dimensions | mm | 80 |
| Rated Output Power | Watt | 480 |
| Rated Torque | Nm | 1,53 – 1,54 |
| Rated Speed | rpm | 3000 |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
| Parameter | Unit | TC-L 80 1,5 03 |
|---|---|---|
| Stall torque | Nm | 1.74 |
| Rated output power for S1 | W | – |
| Rated Output Power for S2 for intermittent duty S2 T= 10’/20′ | W | – |
| Stall current | Arms | 12.3 |
| Stall Current for S1 | Arms | – |
| Stall Current for S2 for intermittent duty S2 T= 10’/20′ | Arms | – |
| Peak current | Arms | 35.1 |
| Nominal current | Arms | 11 |
| Rated Current for S1 | – | |
| Rated Current for S2 for intermittent duty S2 T= 10’/20′ | – | |
| Nominal speed | rpm | 3000 |
| Stall torque for S1 | Nm | – |
| Maximum Speed @48Vdc | rpm | 3700 |
| Torque Constant (± 5%) | Nm/Arms | 0.141 |
| Voltage constant | Vrms/Krpm | 8.5 |
| Phase resistance | Ω | 0.136 |
| Phase inductance | mH | 0.53 |
| Electrical time constant | ms | 3.9 |
| Thermal resistance | °C/W | 1.67 |
| Mechanical time constant | ms | 0.8 |
| Rotor Inertia without brake and without feedback | kg·cm² | 0.64 |
| Motor weight | Kg | 2.25 |
| Stall torque for S2 for intermittent duty S2 T= 10’/20′ | Nm | – |
| Motor weight + Brake | Kg | 2.97 |
| Axial Load applied on the shaft’s center | N | 110 |
| Radial Load applied on the shaft’s center | N | 350 |
| Motor length (without brake) | mm | 128 |
| Motor length (with brake) | mm | 170 |
| Peak Torque | Nm | 4.5 |
| Nominal torque | Nm | 1.53 |
| Rated torque S1 | Nm | – |
| Rated Torque for S2 for intermittent duty S2 T= 10’/20′ | Nm | – |
| Rated voltage | Vdc | 48 |
| Rated output power | W | 480 |
Family Specification
| Family Specification | Unit | TC-L 80 1,5 03 |
|---|---|---|
| Time Rating | Continuous | |
| Certification | CE | |
| Recommendation | Rated output with 250 x 250 x 6 mm metallic heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Motor Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Ambient Humidity | % | 20 to 80% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 |
Family Overview
| Family Overview | Unit | TC-L 80 1,5 03 |
|---|---|---|
| Flange dimensions | mm | 80 |
| Rated Output Power | Watt | 480 |
| Rated Torque | Nm | 1,53 – 1,54 |
| Rated Speed | rpm | 3000 |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
| Parameter | Unit | TC-L 80 2,8 02 |
|---|---|---|
| Stall torque | Nm | – |
| Rated output power for S1 | W | 480 |
| Rated Output Power for S2 for intermittent duty S2 T= 10’/20′ | W | 735 |
| Stall current | Arms | – |
| Stall Current for S1 | Arms | 17.7 |
| Stall Current for S2 for intermittent duty S2 T= 10’/20′ | Arms | 24.8 |
| Peak current | Arms | 82 |
| Nominal current | Arms | – |
| Rated Current for S1 | 14.3 | |
| Rated Current for S2 for intermittent duty S2 T= 10’/20′ | 21.7 | |
| Nominal speed | rpm | 3000 |
| Stall torque for S1 | Nm | 2 |
| Maximum Speed @48Vdc | rpm | 4700 |
| Torque Constant (± 5%) | Nm/Arms | 0.113 |
| Voltage constant | Vrms/Krpm | 6.8 |
| Phase resistance | Ω | 0.064 |
| Phase inductance | mH | 0.24 |
| Electrical time constant | ms | 3.75 |
| Thermal resistance | °C/W | 2.13 |
| Mechanical time constant | ms | 0.65 |
| Rotor Inertia without brake and without feedback | kg·cm² | 1.16 |
| Motor weight | Kg | 3.05 |
| Stall torque for S2 for intermittent duty S2 T= 10’/20′ | Nm | 2.8 |
| Motor weight + Brake | Kg | 3.77 |
| Axial Load applied on the shaft’s center | N | 110 |
| Radial Load applied on the shaft’s center | N | 350 |
| Motor length (without brake) | mm | 153 |
| Motor length (with brake) | mm | 195 |
| Peak Torque | Nm | 8.4 |
| Nominal torque | Nm | – |
| Rated torque S1 | Nm | 1.54 |
| Rated Torque for S2 for intermittent duty S2 T= 10’/20′ | Nm | 2.34 |
| Rated voltage | Vdc | 48 |
| Rated output power | W | – |
Family Specification
| Family Specification | Unit | TC-L 80 2,8 02 |
|---|---|---|
| Time Rating | Continuous | |
| Certification | CE | |
| Recommendation | Rated output with 250 x 250 x 6 mm metallic heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Motor Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Ambient Humidity | % | 20 to 80% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 |
Family Overview
| Family Overview | Unit | TC-L 80 2,8 02 |
|---|---|---|
| Flange dimensions | mm | 80 |
| Rated Output Power | Watt | 480 |
| Rated Torque | Nm | 1,53 – 1,54 |
| Rated Speed | rpm | 3000 |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.