General Specifications
| Parameter | Unit | Half/Full Step Driver Module IB462He 2.0 A |
|---|---|---|
| Control type | Step/Direction | |
| Low-level input current, SCLK, DIR, H/F, enable | mA | -1.2 |
| Low-level input current, reset input | μA | -200 |
| High level input current, SCLK, DIR, H/F, enable | μA | 10 |
| Input pull-up resistance, SCLK, DIR, H/F, enable | kΩ | 4.9 |
| Input pull-up resistance, reset input | kΩ | 52 |
| Motion step frequency | MHz max | 40 |
| Motion step resolutions | steps/full step | 1 … 2 |
| Control interface | Step, direction and enable inputs | |
| Driver type | Half/Full Step | |
| Operating temperature | °C | 0 … +70 |
| Input voltage | +VDC | +12 to +48 |
| Output voltage | A | 0.1 … 2.0 |
| Low-level input voltage, SCLK, DIR, H/F, reset | +VDC | 0.6 |
| Low-level input voltage, enable input | +VDC | 1.3 |
| High-level input voltage, all inputs | +VDC | 5.0 |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
| Parameter | Unit | Half/Full Step Driver Module IB462He 2.0 A |
|---|---|---|
| Control type | Step/Direction | |
| Low-level input current, SCLK, DIR, H/F, enable | mA | -1.2 |
| Low-level input current, reset input | μA | -200 |
| High level input current, SCLK, DIR, H/F, enable | μA | 10 |
| Input pull-up resistance, SCLK, DIR, H/F, enable | kΩ | 4.9 |
| Input pull-up resistance, reset input | kΩ | 52 |
| Motion step frequency | MHz max | 40 |
| Motion step resolutions | steps/full step | 1 … 2 |
| Control interface | Step, direction and enable inputs | |
| Driver type | Half/Full Step | |
| Operating temperature | °C | 0 … +70 |
| Input voltage | +VDC | +12 to +48 |
| Output voltage | A | 0.1 … 2.0 |
| Low-level input voltage, SCLK, DIR, H/F, reset | +VDC | 0.6 |
| Low-level input voltage, enable input | +VDC | 1.3 |
| High-level input voltage, all inputs | +VDC | 5.0 |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.