Description
Flange dimensions: 60 mm
Rated Output Power: 200 – 370 W
Rated Torque: 0,64 – 1,18 Nm
Rated Speed: 3000 rpm
TC-L 60 0,65 32
Flange dimensions: 60 mm
Rated Output Power: 200 – 370 W
Rated Torque: 0,64 – 1,18 Nm
Rated Speed: 3000 rpm
| Parameter | Unit | TC-L 60 0,65 32 |
|---|---|---|
| Stall Torque | Nm | 0.69 |
| Stall Torque for S1 | Nm | – |
| Stall Torque for S2 for intermittent duty S2 T= 10’/20′ | Nm | – |
| Peak Torque | Nm | 1.95 |
| Rated Torque | Nm | 0.64 |
| Rated Torque S1 | Nm | – |
| Rated Torque for S2 for intermittent duty S2 T= 10’/20′ | Nm | – |
| Rated Voltage | Vdc | 24 |
| Rated Output Power | W | 200 |
| Rated Output Power for S1 | W | – |
| Rated Output Power for S2 for intermittent duty S2 T= 10’/20′ | W | – |
| Stall Current | Arms | 13.8 |
| Stall Current for S1 | Arms | – |
| Stall Current for S2 for intermittent duty S2 T= 10’/20′ | Arms | – |
| Peak Current | Arms | 43 |
| Rated Current | Arms | 12.8 |
| Rated Current for S1 | – | |
| Rated Current for S2 for intermittent duty S2 T= 10’/20′ | – | |
| Rated Speed | rpm | 3000 |
| Maximum Speed @24Vdc | rpm | 5000 |
| Maximum Speed @48Vdc | rpm | – |
| Torque Constant (± 5%) | Nm/Arms | 0.05 |
| Voltage Constant (± 5%) | Vrms/Krpm | 3 |
| Phase/phase resistance (± 10%@25°C) | Ω | 0.1 |
| Phase/phase inductance (± 10%) | mH | 0.28 |
| Electrical time constant | ms | 2.75 |
| Thermal Resistance | °C/W | 1.89 |
| Mechanical time constant | ms | 0.78 |
| Rotor Inertia without brake and without feedback | kg·cm² | 0.13 |
| Motor weight | Kg | 1.1 |
| Motor weight + Brake | Kg | 1.5 |
| Axial Load applied on the shaft’s center | N | 70 |
| Radial Load applied on the shaft’s center | N | 220 |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.