Description
Flange dimensions: 40 mm
Rated Output Power: 60 – 100 W
Rated Torque: 0,19 – 0,32 Nm
Rated Speed: 3000 rpm
TC 40 0,16 32
Flange dimensions: 40 mm
Rated Output Power: 60 – 100 W
Rated Torque: 0,19 – 0,32 Nm
Rated Speed: 3000 rpm
| Parameter | Unit | TC 40 0,16 32 |
|---|---|---|
| Continous Stall Torque | Nm | 0.21 |
| Peak Torque | Nm | 0.48 |
| Nominal Torque | Nm | 0.19 |
| Rated Voltage | V | 24 |
| Nominal power | W | 60 |
| Continuous stall Current | Arms | 4.23 |
| Maximun Current | Arms | 9.67 |
| Nominal Current | Arms | 3.96 |
| Nominal working Speed | rpm | 3000 |
| Maximum working speed 24VDC | rpm | 5000 |
| Maximum working speed 48VDC | rpm | – |
| Maximum working speed 230VAC | rpm | – |
| Torque Constant | Nm/Arms | 0.05 |
| Voltage Constant | Vrms/Krpm | 3 |
| Winding resistance | Ohm | 1 |
| Winding inductance | mH | 0.7 |
| Electrical time constant | ms | 0.7 |
| Thermal Resistance | °C/W | 2.38 |
| Mechanical time constant | ms | 1.62 |
| Rotor Inertia without brake and without feedback | kg·cm² | 0.027 |
| Mass without holding brake | Kg | 0.4 |
| Mass with holding brake | Kg | 0.54 |
| Mass without holding brake with absolute encoder | Kg | 0.41 |
| Mass with holding brake with absolute encoder | Kg | 0.61 |
| Maximum axial shaft load applied on the shaft’s center | N | 30 |
| Maximun radial shaft load applied on the shaft’s center | N | 180 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.