DC Coreless Brushed Series
| Parameter | Unit | 0816N5M10-90-3.0 | 0816N5M27-165-6.0 | 0816N5M31-120-3.0 |
|---|---|---|---|---|
| Voltage | V | 3.0 | 3.0 | 3.0 |
| Terminal resistance | Ω | 14.2 | 20.6 | 8.5 |
| No-load speed | rpm | 9000 | 16000 | 12000 |
| No-load current | mA | 8 | 15 | 25 |
| Stall torque | mNm | 0.6 | 0.94 | 0.73 |
| Stall current | mA | 210 | 290 | 350 |
| Nominal torque | mNm | 0.3 | 0.42 | 0.15 |
| Nominal speed | rpm | 5490 | 8800 | 9500 |
| Nominal current | mA | 88 | 140 | 90 |
| Back-EMF constant | mV/rpm | 0.32 | 0.36 | 0.23 |
| Torque constant | mNm/A | 3.06 | 3.39 | 2.22 |
| Operating temperature range | °C | -20~+85 | -20~+85 | -20~+85 |
| Number of channels | Unit | 2 | 3 | — |
|---|---|---|---|---|
| Counts per turn | cpt | 16.32.64.256.512 | 16.32.64.256.512 | — |
| Supply voltage | V | 5.0（5.0） | 5.0（5.0） | — |
| Max. speed | rpm | 30000 | 30000 | — |
| Phase shift | °e | 90±45 | 90±45 | — |
| Output signal | TTL | TTL | — | |
| Diameter | mm | 8 | 8 | — |
| Length（L） | mm | 6.7 | 6.7 | — |
| Gearbox stages | Unit | 1 | 2 | 3 | 4 | 5 | 6 |
|---|---|---|---|---|---|---|---|
| Reduction ratio | 4 | 16 | 64 | 256 | 1024 | 4096 | |
| Max. rated torque | mNm | 5 | 10 | 20 | 30 | 35 | 40 |
| Max. momentary torque | mNm | 15 | 30 | 60 | 90 | 105 | 120 |
| Length（L） | mm | 9.6 | 12.3 | 15 | 17.7 | 20.4 | 23.1 |
| Shell material | Metal | – | – | – | – | – | |
| Gear processing technology | Metal CNC | – | – | – | – | – |
Technische Angaben dienen als Orientierungswerte, da die einzelnen Antriebe und Motoren anwendungsbezogen konfiguriert werden. Technische und optische Änderungen vorbehalten.
| Parameter | Unit | 0816N5M10-90-3.0 |
|---|---|---|
| Voltage | V | 3.0 |
| Terminal resistance | Ω | 14.2 |
| No-load speed | rpm | 9000 |
| No-load current | mA | 8 |
| Stall torque | mNm | 0.6 |
| Stall current | mA | 210 |
| Nominal torque | mNm | 0.3 |
| Nominal speed | rpm | 5490 |
| Nominal current | mA | 88 |
| Back-EMF constant | mV/rpm | 0.32 |
| Torque constant | mNm/A | 3.06 |
| Operating temperature range | °C | -20~+85 |
| Number of channels | Unit | 2 | 3 | — |
|---|---|---|---|---|
| Counts per turn | cpt | 16.32.64.256.512 | 16.32.64.256.512 | — |
| Supply voltage | V | 5.0（5.0） | 5.0（5.0） | — |
| Max. speed | rpm | 30000 | 30000 | — |
| Phase shift | °e | 90±45 | 90±45 | — |
| Output signal | TTL | TTL | — | |
| Diameter | mm | 8 | 8 | — |
| Length（L） | mm | 6.7 | 6.7 | — |
| Gearbox stages | Unit | 1 | 2 | 3 | 4 | 5 | 6 |
|---|---|---|---|---|---|---|---|
| Reduction ratio | 4 | 16 | 64 | 256 | 1024 | 4096 | |
| Max. rated torque | mNm | 5 | 10 | 20 | 30 | 35 | 40 |
| Max. momentary torque | mNm | 15 | 30 | 60 | 90 | 105 | 120 |
| Length（L） | mm | 9.6 | 12.3 | 15 | 17.7 | 20.4 | 23.1 |
| Shell material | Metal | – | – | – | – | – | |
| Gear processing technology | Metal CNC | – | – | – | – | – |
Technische Angaben dienen als Orientierungswerte, da die einzelnen Antriebe und Motoren anwendungsbezogen konfiguriert werden. Technische und optische Änderungen vorbehalten.
| Parameter | Unit | 0816N5M27-165-6.0 |
|---|---|---|
| Voltage | V | 3.0 |
| Terminal resistance | Ω | 20.6 |
| No-load speed | rpm | 16000 |
| No-load current | mA | 15 |
| Stall torque | mNm | 0.94 |
| Stall current | mA | 290 |
| Nominal torque | mNm | 0.42 |
| Nominal speed | rpm | 8800 |
| Nominal current | mA | 140 |
| Back-EMF constant | mV/rpm | 0.36 |
| Torque constant | mNm/A | 3.39 |
| Operating temperature range | °C | -20~+85 |
| Number of channels | Unit | 2 | 3 | — |
|---|---|---|---|---|
| Counts per turn | cpt | 16.32.64.256.512 | 16.32.64.256.512 | — |
| Supply voltage | V | 5.0（5.0） | 5.0（5.0） | — |
| Max. speed | rpm | 30000 | 30000 | — |
| Phase shift | °e | 90±45 | 90±45 | — |
| Output signal | TTL | TTL | — | |
| Diameter | mm | 8 | 8 | — |
| Length（L） | mm | 6.7 | 6.7 | — |
| Gearbox stages | Unit | 1 | 2 | 3 | 4 | 5 | 6 |
|---|---|---|---|---|---|---|---|
| Reduction ratio | 4 | 16 | 64 | 256 | 1024 | 4096 | |
| Max. rated torque | mNm | 5 | 10 | 20 | 30 | 35 | 40 |
| Max. momentary torque | mNm | 15 | 30 | 60 | 90 | 105 | 120 |
| Length（L） | mm | 9.6 | 12.3 | 15 | 17.7 | 20.4 | 23.1 |
| Shell material | Metal | – | – | – | – | – | |
| Gear processing technology | Metal CNC | – | – | – | – | – |
Technische Angaben dienen als Orientierungswerte, da die einzelnen Antriebe und Motoren anwendungsbezogen konfiguriert werden. Technische und optische Änderungen vorbehalten.
| Parameter | Unit | 0816N5M31-120-3.0 |
|---|---|---|
| Voltage | V | 3.0 |
| Terminal resistance | Ω | 8.5 |
| No-load speed | rpm | 12000 |
| No-load current | mA | 25 |
| Stall torque | mNm | 0.73 |
| Stall current | mA | 350 |
| Nominal torque | mNm | 0.15 |
| Nominal speed | rpm | 9500 |
| Nominal current | mA | 90 |
| Back-EMF constant | mV/rpm | 0.23 |
| Torque constant | mNm/A | 2.22 |
| Operating temperature range | °C | -20~+85 |
| Number of channels | Unit | 2 | 3 | — |
|---|---|---|---|---|
| Counts per turn | cpt | 16.32.64.256.512 | 16.32.64.256.512 | — |
| Supply voltage | V | 5.0（5.0） | 5.0（5.0） | — |
| Max. speed | rpm | 30000 | 30000 | — |
| Phase shift | °e | 90±45 | 90±45 | — |
| Output signal | TTL | TTL | — | |
| Diameter | mm | 8 | 8 | — |
| Length（L） | mm | 6.7 | 6.7 | — |
| Gearbox stages | Unit | 1 | 2 | 3 | 4 | 5 | 6 |
|---|---|---|---|---|---|---|---|
| Reduction ratio | 4 | 16 | 64 | 256 | 1024 | 4096 | |
| Max. rated torque | mNm | 5 | 10 | 20 | 30 | 35 | 40 |
| Max. momentary torque | mNm | 15 | 30 | 60 | 90 | 105 | 120 |
| Length（L） | mm | 9.6 | 12.3 | 15 | 17.7 | 20.4 | 23.1 |
| Shell material | Metal | – | – | – | – | – | |
| Gear processing technology | Metal CNC | – | – | – | – | – |
Technische Angaben dienen als Orientierungswerte, da die einzelnen Antriebe und Motoren anwendungsbezogen konfiguriert werden. Technische und optische Änderungen vorbehalten.
