DS-OLS7-FRS4

Loggen Sie sich ein, um Preise für dieses Produkt zu sehen

Artikelnummer: DS-OLS7-FRS4 Kategorie: Stepper Controller

Beschreibung

Beschreibung

DS-OLS7-FRS4 Stand Alone Open Loop -RS485
Apply to Size 8, 11, 14, 17 of Step Motors

Motor Characteristics

Parameter	Unit	DS-OLS7-FRS4
Applied Motor		Adapted to two-phase hybrid stepping motor,DS-OLS7-FRS4 Maximum fit 3.2A
Humidity		< 85 % RH, No condensation
Temperature	°C	0 – +40
Cooling		Installed in a ventilated environment
Power Supply	V	24 – 48V DC
Output Current	A	0.1A-3.2A/ phase
Drive Method		Full-bridge bipolar PWM driver
Input Signal (Pulse Signal,Offline Signal,Direction Signal)		Optocoupler input voltage H = 3.5 – 26V , L = 0 – 0.8V, On current 6-15mA
Output Signal Alarm output		Optically isolated output, highest withstand voltage30VD, Maximum saturation current 50mA
Size	mm	94 × 77 × 27mm（Including terminal block）
Weight	g	About 175 g
Operation Environment Precaution		Avoid dust, oil mist and corrosive gases

Features

Input power : DC 24V-48V Output rated current (peak value): 0~4.5A/phase Pulse direction and RS485 control mode are optional to support MODBUS RTU Output current : 0 – 4.5A Pulse / Direction, RS-485 communication selection support MODBUS-RTU protocol Torque control mode Encoder signal output Max. Output current : 6.5A PWM constant current bipolar micro-stepping drive Support CANopen communication protocol, support control mode PP, PV, HM, PT Optically isolated inputs Motor short circuit protection, under-voltage protection, over-voltage protection, over-current protection, etc. Exquisite design, low noise and low vibration Support EtherCAT communication protocol, support control mode PP, PV, HM, CSP, CVS

Technische Angaben dienen als Orientierungswerte, da die einzelnen Antriebe und Motoren anwendungsbezogen konfiguriert werden. Technische und optische Änderungen vorbehalten.

DS-OLS7-FRS4

DS-OLS7-FRS4-installation.jpg (jpeg, 198.17K)

1. When designs installation, please consider the size of terminals and pace required for heat dissipation. 2. The reliable working temperature of the driver is usually within 60℃ and motor is within 80℃ 3. When install driver, please install it vertically and laterally to make the radiator from strong air convection, when necessary, install a fan near the driver to force heat dissipation to ensure that the driver works within reliable working temperature range.

Stand Alone Stepper Electronics 3

Stand_Alone_Stepper_Electronics_1.png (png, 617.45K)

Nehmen Sie Kontakt auf

+49 7720 995858-0 info@kocomotion.de

Company

Dieses Feld dient zur Validierung und sollte nicht verändert werden.

Produkt

Stückzahl

Firma(erforderlich)

Telefon

Name

E-Mail(erforderlich)

Anschrift

Nachricht

CAPTCHA

Brushless DC Motors

Brushed DC Motors

Stepper Motors

Linear Actuators

Controller

Industrieautomation / Maschinenbau

Sicherheitstechnik / Schließtechnik

Smart Home und Gebäudetechnik

Medizintechnik

Akkutools

Automotive

DS-OLS7-FRS4

Beschreibung

Motor Characteristics

Features

DS-OLS7-FRS4

Stand Alone Stepper Electronics 3

Nehmen Sie Kontakt auf

Brushless DC Motors

Brushed DC Motors

Stepper Motors

Linear Actuators

Controller

Industrieautomation / Maschinenbau

Sicherheitstechnik / Schließtechnik

Smart Home und Gebäudetechnik

Medizintechnik

Akkutools

Automotive

DS-OLS7-FRS4

Beschreibung

Ähnliche Produkte

Integrated Stepper Electronics 1

DS-CLS3-FETC-4I

Stand Alone Stepper Electronics 3

CS3E-D1008

Motor Characteristics

Features

DS-OLS7-FRS4

Stand Alone Stepper Electronics 3

Nehmen Sie Kontakt auf