Description
Flange dimensions: 40 mm
Rated Output Power: 60 – 100 W
Rated Torque: 0,19 – 0,32 Nm
Rated Speed: 3000 rpm
TC-X 40 0,32 01
Flange dimensions: 40 mm
Rated Output Power: 60 – 100 W
Rated Torque: 0,19 – 0,32 Nm
Rated Speed: 3000 rpm
| Parameter | Unit | TC-X 40 0,32 01 |
|---|---|---|
| Continous Stall Torque (ambient temperature 0 to +40°C) | Nm | 0.34 |
| Peak Torque (ambient temperature 0 to +40°C) | Nm | 0.96 |
| Nominal Torque (ambient temperature 0 to +40°C) | Nm | 0.32 |
| Rated Voltage (ambient temperature 0 to +40°C) | Vdc | 48 |
| Nominal power (ambient temperature 0 to +40°C) | W | 100 |
| Continuous stall Current (ambient temperature 0 to +40°C) | Arms | 3.61 |
| Maximun Current (ambient temperature 0 to +40°C) | Arms | 10.18 |
| Nominal Current (ambient temperature 0 to +40°C) | Arms | 3.48 |
| Nominal working Speed (ambient temperature 0 to +40°C) | rpm | 3000 |
| Maximum working speed 24VDC (ambient temperature 0 to +40°C) | rpm | – |
| Maximum working speed 48VDC (ambient temperature 0 to +40°C) | rpm | 5000 |
| Maximum working speed 230VAC (ambient temperature 0 to +40°C) | rpm | – |
| Torque Constant (ambient temperature 0 to +40°C) | Nm/Arms | 0.094 |
| Voltage Constant (ambient temperature 0 to +40°C) | Vrms/Krpm | 5.7 |
| Winding resistance (ambient temperature 0 to +40°C) | Ω | 1.1 |
| Winding inductance (ambient temperature 0 to +40°C) | mH | 1.42 |
| Electrical time constant (ambient temperature 0 to +40°C) | ms | 1.29 |
| Thermal Resistance (ambient temperature 0 to +40°C) | °C/W | 2.3 |
| Mechanical time constant (ambient temperature 0 to +40°C) | ms | 0.88 |
| Rotor Inertia without feedback (ambient temperature 0 to +40°C) | kg·cm² | 0.047 |
| Mass (ambient temperature 0 to +40°C) | Kg | 0.54 |
| Maximum axial shaft load applied on the shaft’s center (ambient temperature 0 to +40°C) | N | 30 |
| Maximun radial shaft load applied on the shaft’s center (ambient temperature 0 to +40°C) | N | 180 |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.