Description
Flange dimensions: 80 mm
Rated Output Power: 480 W
Rated Torque: 1,53 – 1,54 Nm
Rated Speed: 3000 rpm
TC-L 80 2,8 02
Flange dimensions: 80 mm
Rated Output Power: 480 W
Rated Torque: 1,53 – 1,54 Nm
Rated Speed: 3000 rpm
| Parameter | Unit | TC-L 80 2,8 02 |
|---|---|---|
| Stall Torque | Nm | – |
| Stall Torque for S1 | Nm | 2 |
| Stall Torque for S2 for intermittent duty S2 T= 10’/20′ | Nm | 2.8 |
| Peak Torque | Nm | 8.4 |
| Rated Torque | Nm | – |
| Rated Torque S1 | Nm | 1.54 |
| Rated Torque for S2 for intermittent duty S2 T= 10’/20′ | Nm | 2.34 |
| Rated Voltage | Vdc | 48 |
| Rated Output Power | W | – |
| Rated Output Power for S1 | W | 480 |
| Rated Output Power for S2 for intermittent duty S2 T= 10’/20′ | W | 735 |
| Stall Current | Arms | – |
| Stall Current for S1 | Arms | 17.7 |
| Stall Current for S2 for intermittent duty S2 T= 10’/20′ | Arms | 24.8 |
| Peak Current | Arms | 82 |
| Rated Current | Arms | – |
| Rated Current for S1 | 14.3 | |
| Rated Current for S2 for intermittent duty S2 T= 10’/20′ | 21.7 | |
| Rated Speed | rpm | 3000 |
| Maximum Speed @48Vdc | rpm | 4700 |
| Torque Constant (± 5%) | Nm/Arms | 0.113 |
| Voltage Constant (± 5%) | Vrms/Krpm | 6.8 |
| Phase/phase resistance (± 10%@25°C) | Ohm | 0.064 |
| Phase/phase inductance (± 10%) | mH | 0.24 |
| Electrical time constant | ms | 3.75 |
| Thermal Resistance | °C/W | 2.13 |
| Mechanical time constant | ms | 0.65 |
| Rotor Inertia without brake and without feedback | kg·cm² | 1.16 |
| Motor weight | Kg | 3.05 |
| Motor weight + Brake | Kg | 3.77 |
| Axial Load applied on the shaft’s center | N | 110 |
| Radial Load applied on the shaft’s center | N | 350 |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.