General Specifications
| Parameter | Unit | MDM1 NEMA 34 Step/direction Input IP20 |
|---|---|---|
| Control type | Step/direction input | |
| Input voltage | +VDC | +12 to +75 |
| Power supply current requirement | A | 4.0 |
| Feature set | Clock and direction inputs | |
| P1 connector options | Power & I/O | Flying Leads, Pluggable, Wire Crimp |
| P2 connector options | Comm | None |
| Communications interface | SPI | |
| NEMA size | 34 (85×85 mm) | |
| Holding torque range | Nm | 2.88 … 7.70 |
| Temperature heatsink (short-time) | °C | max. 75 |
| IP rating | IP20 |
Parameter settings
| Parameter | Unit | MDM1 NEMA 34 Step/direction Input IP20 |
|---|---|---|
| Input Step, Direction & Enable voltage | + VDC | 5 … 24 |
| Current | mA Max | 14.6 |
| Digital Filter Range | MHz … kHz | 10 … 38.8 |
| Step Frequency | MHz Max | 5 |
| Microstep Resolutions | Steps/Rev | 200 … 51200 |
| Clock Types | Step/Direction, Step Up/Step Down, Quadrature | – |
Motor Characteristics
| Name | Unit | Single Length | Double Length | Triple Length |
|---|---|---|---|---|
| Holding torque | Ncm | 288 | 405 | 770 |
| Rotor inertia | kgcm2 | 0.9 | 1.35 | 2.70 |
| Detent Torque | Ncm | 7.7 | 10.0 | 14.0 |
| Weight | g | 1.9 | 2.5 | 4.0 |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
MDM1 NEMA 34
MDM1 NEMA 34 Step/direction Input IP20
datasheet
firmware
models_3D
software
| Parameter | Unit | MDM1 NEMA 34 Step/direction Input IP20 |
|---|---|---|
| Control type | Step/direction input | |
| Input voltage | +VDC | +12 to +75 |
| Power supply current requirement | A | 4.0 |
| Feature set | Clock and direction inputs | |
| P1 connector options | Power & I/O | Flying Leads, Pluggable, Wire Crimp |
| P2 connector options | Comm | None |
| Communications interface | SPI | |
| NEMA size | 34 (85×85 mm) | |
| Holding torque range | Nm | 2.88 … 7.70 |
| Temperature heatsink (short-time) | °C | max. 75 |
| IP rating | IP20 |
Parameter settings
| Parameter settings | Unit | MDM1 NEMA 34 Step/direction Input IP20 |
|---|---|---|
| Input Step, Direction & Enable voltage | + VDC | 5 … 24 |
| Current | mA Max | 14.6 |
| Digital Filter Range | MHz … kHz | 10 … 38.8 |
| Step Frequency | MHz Max | 5 |
| Microstep Resolutions | Steps/Rev | 200 … 51200 |
| Clock Types | Step/Direction, Step Up/Step Down, Quadrature | – |
Motor Characteristics
| Name | Unit | Single Length | Double Length | Triple Length |
|---|---|---|---|---|
| Holding torque | Ncm | 288 | 405 | 770 |
| Rotor inertia | kgcm2 | 0.9 | 1.35 | 2.70 |
| Detent Torque | Ncm | 7.7 | 10.0 | 14.0 |
| Weight | g | 1.9 | 2.5 | 4.0 |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.