Specification
| Parameter | Unit | TC-E 80 3A D2 2 | TC-E 80 3B D4 2 | TC-E 80 3A D2 4 | TC-E 80 3B F3 4 |
|---|---|---|---|---|---|
| Continuous stall torque | Nm | 1.27 | 2.39 | 1.27 | 2.39 |
| Maximum voltage to ground | Vac | 255 | 255 | 265 | 265 |
| Maximum current | Arms | 7.8 | 13.5 | 7.8 | 8.66 |
| Continuous stall current | Arms | 2.29 | 4.01 | 2.29 | 2.63 |
| Voltage constant | Vrms/Krpm | 33.5 | 36 | 33.5 | 55 |
| Torque Constant | Nm/Arms | 0.55 | 0.6 | 0.55 | 0.91 |
| Winding resistance | Ω | 3.2 | 1.5 | 3.2 | 3.5 |
| Winding inductance qu-v | mH | 12 | 6.6 | 12 | 15.4 |
| Winding inductance du-v | mH | 11.3 | 6.1 | 11.3 | 14.2 |
| Rotor inertia without holding brake | kg·cm² | 0.66 | 1.18 | 0.66 | 1.18 |
| Rotor inertia with holding brake | kg·cm² | 0.71 | 1.23 | 0.71 | 1.23 |
| Peak Torque | Nm | 3.81 | 7.16 | 3.81 | 7.16 |
| Rotor inertia without holding brake | 0.66 | 1.18 | 0.66 | 1.18 | |
| Rotor inertia with holding brake | 0.71 | 1.23 | 0.71 | 1.23 | |
| Mass without holding brake | Kg | 2 | 2.8 | 2 | 2.8 |
| Mass with holding brake | Kg | 2.8 | 3.6 | 2.8 | 3.6 |
| Rotor inertia without holding brake | 0.66 | 1.18 | 0.66 | 1.18 | |
| Rotor inertia with holding brake | 0.71 | 1.23 | 0.71 | 1.23 | |
| Thermal time constant | min | 25 | 28 | 25 | 28 |
| Maximum radial shaft load | N | 332 | 332 | 332 | 332 |
| Maximum axial shaft load | N | 115 | 115 | 115 | 115 |
| Motor length (without brake, with feedback A2) | mm | 112 | 138 | 112 | 138 |
| Nominal speed | rpm | 3000 | 3000 | 3000 | 3000 |
| Motor length (with brake, with feedback A2) | mm | 152 | 178 | 152 | 178 |
| Motor length (without brake, with feedback A1/E1/A6) | mm | 122 | 148 | 122 | 148 |
| Motor length (with brake, with feedback A1/E1/A6) | mm | 162 | 188 | 162 | 188 |
| Maximum working speed | rpm | 6000 | 6000 | 6000 | 6000 |
| Nominal torque | Nm | 1.27 | 2.39 | 1.27 | 2.39 |
| Nominal current | Arms | 2.52 | 4.29 | 2.52 | 2.81 |
| Nominal power | kW | 0.4 | 0.75 | 0.4 | 0.75 |
| Rated winding voltage | Vac | 230 | 230 | 400 | 400 |
| Maximum winding voltage | Vdc | 360 | 360 | 650 | 650 |
Family Specification
| Family Specification | Unit | TC-E 80 |
|---|---|---|
| Time Rating | Continuous | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 54 Standard IP 65 with shaft sealing | |
| Ambient Temperature | °C | -20 to 40 |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Certification | UL 1004, CSA, CE, RoHS, Reach compliance | |
| Recommendation | Rated output with 250x250x12mm aluminum heat sink flange coupling – Ambient temperature 40°C – Derating must be considered if the oil seal is applied |
Family Overview
| Family Overview | Unit | TC-E 80 |
|---|---|---|
| Flange dimensions | mm | 80 |
| Rated Output Power | Watt | 400 – 750 |
| Rated Torque | Nm | 1,27 – 2,39 |
| Rated Speed | rpm | 3000 |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
TC-E 80
datasheet
| Parameter | Unit | TC-E 80 3A D2 2 |
|---|---|---|
| Continuous stall torque | Nm | 1.27 |
| Maximum voltage to ground | Vac | 255 |
| Maximum current | Arms | 7.8 |
| Continuous stall current | Arms | 2.29 |
| Voltage constant | Vrms/Krpm | 33.5 |
| Torque Constant | Nm/Arms | 0.55 |
| Winding resistance | Ω | 3.2 |
| Winding inductance qu-v | mH | 12 |
| Winding inductance du-v | mH | 11.3 |
| Rotor inertia without holding brake | kg·cm² | 0.66 |
| Rotor inertia with holding brake | kg·cm² | 0.71 |
| Peak Torque | Nm | 3.81 |
| Rotor inertia without holding brake | – | |
| Rotor inertia with holding brake | – | |
| Mass without holding brake | Kg | 2 |
| Mass with holding brake | Kg | 2.8 |
| Rotor inertia without holding brake | – | |
| Rotor inertia with holding brake | – | |
| Thermal time constant | min | 25 |
| Maximum radial shaft load | N | 332 |
| Maximum axial shaft load | N | 115 |
| Motor length (without brake, with feedback A2) | mm | 112 |
| Nominal speed | rpm | 3000 |
| Motor length (with brake, with feedback A2) | mm | 152 |
| Motor length (without brake, with feedback A1/E1/A6) | mm | 122 |
| Motor length (with brake, with feedback A1/E1/A6) | mm | 162 |
| Maximum working speed | rpm | 6000 |
| Nominal torque | Nm | 1.27 |
| Nominal current | Arms | 2.52 |
| Nominal power | kW | 0.4 |
| Rated winding voltage | Vac | 230 |
| Maximum winding voltage | Vdc | 360 |
Family Specification
| Family Specification | Unit | TC-E 80 3A D2 2 |
|---|---|---|
| Time Rating | Continuous | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 54 Standard IP 65 with shaft sealing | |
| Ambient Temperature | °C | -20 to 40 |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Certification | UL 1004, CSA, CE, RoHS, Reach compliance | |
| Recommendation | Rated output with 250x250x12mm aluminum heat sink flange coupling – Ambient temperature 40°C – Derating must be considered if the oil seal is applied |
Family Overview
| Family Overview | Unit | TC-E 80 3A D2 2 |
|---|---|---|
| Flange dimensions | mm | 80 |
| Rated Output Power | Watt | 400 – 750 |
| Rated Torque | Nm | 1,27 – 2,39 |
| Rated Speed | rpm | 3000 |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
TC-E 80
datasheet
| Parameter | Unit | TC-E 80 3B D4 2 |
|---|---|---|
| Continuous stall torque | Nm | 2.39 |
| Maximum voltage to ground | Vac | 255 |
| Maximum current | Arms | 13.5 |
| Continuous stall current | Arms | 4.01 |
| Voltage constant | Vrms/Krpm | 36 |
| Torque Constant | Nm/Arms | 0.6 |
| Winding resistance | Ω | 1.5 |
| Winding inductance qu-v | mH | 6.6 |
| Winding inductance du-v | mH | 6.1 |
| Rotor inertia without holding brake | kg·cm² | 1.18 |
| Rotor inertia with holding brake | kg·cm² | 1.23 |
| Peak Torque | Nm | 7.16 |
| Rotor inertia without holding brake | 1.53 | |
| Rotor inertia with holding brake | 1.58 | |
| Mass without holding brake | Kg | 2.8 |
| Mass with holding brake | Kg | 3.6 |
| Rotor inertia without holding brake | 2.9 | |
| Rotor inertia with holding brake | 3.7 | |
| Thermal time constant | min | 28 |
| Maximum radial shaft load | N | 332 |
| Maximum axial shaft load | N | 115 |
| Motor length (without brake, with feedback A2) | mm | 138 |
| Nominal speed | rpm | 3000 |
| Motor length (with brake, with feedback A2) | mm | 178 |
| Motor length (without brake, with feedback A1/E1/A6) | mm | 148 |
| Motor length (with brake, with feedback A1/E1/A6) | mm | 188 |
| Maximum working speed | rpm | 6000 |
| Nominal torque | Nm | 2.39 |
| Nominal current | Arms | 4.29 |
| Nominal power | kW | 0.75 |
| Rated winding voltage | Vac | 230 |
| Maximum winding voltage | Vdc | 360 |
Family Specification
| Family Specification | Unit | TC-E 80 3B D4 2 |
|---|---|---|
| Time Rating | Continuous | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 54 Standard IP 65 with shaft sealing | |
| Ambient Temperature | °C | -20 to 40 |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Certification | UL 1004, CSA, CE, RoHS, Reach compliance | |
| Recommendation | Rated output with 250x250x12mm aluminum heat sink flange coupling – Ambient temperature 40°C – Derating must be considered if the oil seal is applied |
Family Overview
| Family Overview | Unit | TC-E 80 3B D4 2 |
|---|---|---|
| Flange dimensions | mm | 80 |
| Rated Output Power | Watt | 400 – 750 |
| Rated Torque | Nm | 1,27 – 2,39 |
| Rated Speed | rpm | 3000 |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
TC-E 80
datasheet
| Parameter | Unit | TC-E 80 3A D2 4 |
|---|---|---|
| Continuous stall torque | Nm | 1.27 |
| Maximum voltage to ground | Vac | 265 |
| Maximum current | Arms | 7.8 |
| Continuous stall current | Arms | 2.29 |
| Voltage constant | Vrms/Krpm | 33.5 |
| Torque Constant | Nm/Arms | 0.55 |
| Winding resistance | Ω | 3.2 |
| Winding inductance qu-v | mH | 12 |
| Winding inductance du-v | mH | 11.3 |
| Rotor inertia without holding brake | kg·cm² | 0.66 |
| Rotor inertia with holding brake | kg·cm² | 0.71 |
| Peak Torque | Nm | 3.81 |
| Rotor inertia without holding brake | – | |
| Rotor inertia with holding brake | – | |
| Mass without holding brake | Kg | 2 |
| Mass with holding brake | Kg | 2.8 |
| Rotor inertia without holding brake | – | |
| Rotor inertia with holding brake | – | |
| Thermal time constant | min | 25 |
| Maximum radial shaft load | N | 332 |
| Maximum axial shaft load | N | 115 |
| Motor length (without brake, with feedback A2) | mm | 112 |
| Nominal speed | rpm | 3000 |
| Motor length (with brake, with feedback A2) | mm | 152 |
| Motor length (without brake, with feedback A1/E1/A6) | mm | 122 |
| Motor length (with brake, with feedback A1/E1/A6) | mm | 162 |
| Maximum working speed | rpm | 6000 |
| Nominal torque | Nm | 1.27 |
| Nominal current | Arms | 2.52 |
| Nominal power | kW | 0.4 |
| Rated winding voltage | Vac | 400 |
| Maximum winding voltage | Vdc | 650 |
Family Specification
| Family Specification | Unit | TC-E 80 3A D2 4 |
|---|---|---|
| Time Rating | Continuous | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 54 Standard IP 65 with shaft sealing | |
| Ambient Temperature | °C | -20 to 40 |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Certification | UL 1004, CSA, CE, RoHS, Reach compliance | |
| Recommendation | Rated output with 250x250x12mm aluminum heat sink flange coupling – Ambient temperature 40°C – Derating must be considered if the oil seal is applied |
Family Overview
| Family Overview | Unit | TC-E 80 3A D2 4 |
|---|---|---|
| Flange dimensions | mm | 80 |
| Rated Output Power | Watt | 400 – 750 |
| Rated Torque | Nm | 1,27 – 2,39 |
| Rated Speed | rpm | 3000 |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
TC-E 80
datasheet
| Parameter | Unit | TC-E 80 3B F3 4 |
|---|---|---|
| Continuous stall torque | Nm | 2.39 |
| Maximum voltage to ground | Vac | 265 |
| Maximum current | Arms | 8.66 |
| Continuous stall current | Arms | 2.63 |
| Voltage constant | Vrms/Krpm | 55 |
| Torque Constant | Nm/Arms | 0.91 |
| Winding resistance | Ω | 3.5 |
| Winding inductance qu-v | mH | 15.4 |
| Winding inductance du-v | mH | 14.2 |
| Rotor inertia without holding brake | kg·cm² | 1.18 |
| Rotor inertia with holding brake | kg·cm² | 1.23 |
| Peak Torque | Nm | 7.16 |
| Rotor inertia without holding brake | 1.53 | |
| Rotor inertia with holding brake | 1.58 | |
| Mass without holding brake | Kg | 2.8 |
| Mass with holding brake | Kg | 3.6 |
| Rotor inertia without holding brake | 2.9 | |
| Rotor inertia with holding brake | 3.7 | |
| Thermal time constant | min | 28 |
| Maximum radial shaft load | N | 332 |
| Maximum axial shaft load | N | 115 |
| Motor length (without brake, with feedback A2) | mm | 138 |
| Nominal speed | rpm | 3000 |
| Motor length (with brake, with feedback A2) | mm | 178 |
| Motor length (without brake, with feedback A1/E1/A6) | mm | 148 |
| Motor length (with brake, with feedback A1/E1/A6) | mm | 188 |
| Maximum working speed | rpm | 6000 |
| Nominal torque | Nm | 2.39 |
| Nominal current | Arms | 2.81 |
| Nominal power | kW | 0.75 |
| Rated winding voltage | Vac | 400 |
| Maximum winding voltage | Vdc | 650 |
Family Specification
| Family Specification | Unit | TC-E 80 3B F3 4 |
|---|---|---|
| Time Rating | Continuous | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 54 Standard IP 65 with shaft sealing | |
| Ambient Temperature | °C | -20 to 40 |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Certification | UL 1004, CSA, CE, RoHS, Reach compliance | |
| Recommendation | Rated output with 250x250x12mm aluminum heat sink flange coupling – Ambient temperature 40°C – Derating must be considered if the oil seal is applied |
Family Overview
| Family Overview | Unit | TC-E 80 3B F3 4 |
|---|---|---|
| Flange dimensions | mm | 80 |
| Rated Output Power | Watt | 400 – 750 |
| Rated Torque | Nm | 1,27 – 2,39 |
| Rated Speed | rpm | 3000 |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.