Description
Flange dimensions: 80 mm
Rated Output Power: 390 – 520 W
Rated Torque: 1,5 – 2,0 Nm
Rated Speed: 2500 rpm
Fieldbus: CanOpen/Ethercat
Flange dimensions: 80 mm
Rated Output Power: 390 – 520 W
Rated Torque: 1,5 – 2,0 Nm
Rated Speed: 2500 rpm
Fieldbus: CanOpen/Ethercat
Flange dimensions: 80 mm
Rated Output Power: 390 – 520 W
Rated Torque: 1,5 – 2,0 Nm
Rated Speed: 2500 rpm
Fieldbus: CanOpen/Ethercat
Parameter | Unit | DUET FLEXI 80 1,5 03 |
---|---|---|
Rated Voltage | Vdc | 48 |
Auxiliary Voltage (+6% -10%) | Vdc | 24 |
Minimum Voltage | Vdc | 24 |
Maximum Voltage | Vdc | 60 |
Stall Torque @power stage temperature ≤ 50°C (rated current limited to 10 Arms @ power stage temperature > 50°C < 70°C) | Nm | 1.5 |
Peak Torque | Nm | 4.5 |
Rated Torque @power stage temperature ≤ 50°C (rated current limited to 10 Arms @ power stage temperature > 50°C < 70°C) | Nm | 1.5 |
Rated output power @power stage temperature ≤ 50°C (rated current limited to 10 Arms @ power stage temperature > 50°C < 70°C) | W | 390 |
Rated output Power @ 10 Arms | W | 360 |
Stall current @power stage temperature ≤ 50°C (rated current limited to 10 Arms @ power stage temperature > 50°C < 70°C) | Arms | 10.7 |
Peak Current | Arms | 32 |
Rated current @power stage temperature ≤ 50°C (rated current limited to 10 Arms @ power stage temperature > 50°C < 70°C) | Arms | 11 |
Rated Speed @48Vdc | rpm | 2500 |
Maximum Speed @48Vdc | rpm | 3600 |
Maximum Speed @24Vdc | rpm | 1800 |
Torque Constant (± 5%) | Nm/Arms | 0.141 |
Voltage Constant (± 5%) | Vrms/Krpm | 8.5 |
Phase/phase resistance (± 10%@25°C) | Ω | 0.14 |
Phase/phase inductance (± 10%) | mH | 0.53 |
Electrical time constant | ms | 3.9 |
Thermal Resistance | °C/W | 1.7 |
Mechanical time constant | ms | 0.66 |
Rotor Inertia without brake and without feedback | kg·cm² | 0.64 |
Duet weight | Kg | 2.4 |
Duet weight with brake | Kg | 3.1 |
Axial Load applied on the shaft’s center | N | 110 |
Radial Load applied on the shaft’s center | N | 350 |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.