Motor Characteristics
| Parameter | Unit | 36ZWWC60-18 | 36ZWWC60-24 | 36ZWWC60-36 | 36ZWWC60-48 | 36ZWWC60-24-2 |
|---|---|---|---|---|---|---|
| Pole Pairs | 1 | 1 | 1 | 1 | 2 | |
| Insulation resistance | MΩ/500VDC | 100 | 100 | 100 | 100 | 100 |
| Weight | gr | 270 | 270 | 270 | 270 | 270 |
| Rated voltage | V | 18 | 24 | 36 | 48 | 24 |
| Nominal power | W | 68 | 69 | 74 | 85 | 85 |
| Nominal torque | mNm | 70 | 70 | 70 | 70 | 100 |
| Nominal speed | RPM | 7340 | 9345 | 10000 | 11700 | 8100 |
| Nominal current | A | 4.97 | 3.78 | 2.59 | 2.21 | 4.80 |
| No-load speed | RPM | 10000 | 11000 | 11500 | 13000 | 10300 |
| No-load current | A | 0.37 | 0.37 | 0.22 | 0.2 | 0.36 |
| Motor Efficiency | % | 76 | 76 | 79.5 | 80 | 84.4 |
| Phase resistance | Ω | 0.6 | 0.68 | 1.45 | 2.1 | 0.41 |
| Noise (Ambient noise 20db, test distance 1M) | dB | ＜50 | ＜50 | ＜50 | ＜50 | ＜50 |
| Case – Environmental thermal resistance (no load) | K/W | 0.42 | 0.43 | 0.44 | 0.36 | 0.58 |
| Motor Thermal Time Constant(No Load) | S | 1350 | 1350 | 2700 | 1080 | 1330 |
| Ambient temperature | °C | 21.1 | 23.1 | 20.1 | 20.4 | 19.5 |
| Maximum Winding Temperature(No Load) | °C | 49.4 | 52.9 | 52.8 | 50.8 | 69.3 |
| Torque Constant | mN·m/A | 14.08 | 18.50 | 27.07 | 31.62 | 20.83 |
| Back-EMF Constant /Peak Value | V/Krpm | 2.09 | 2.74 | 4.01 | 4.68 | 3.08 |
| Back-EMF constant (RMS) | V/Krpm | 1.47 | 1.94 | 2.83 | 3.31 | 2.18 |
| Peak Torque | mNm | 422.47 | 653.09 | 672.16 | 722.82 | 1219.51 |
| Peak current | A | 30 | 35 | 25 | 23 | 59 |
| Phase inductance | mH | 0.08 | 0.1 | 0.19 | 0.27 | 0.042 |
| Rotor inertia | g·cm² | 39 | 39 | 39 | 39 | 39 |
| Mechanical Time Constant | ms | 11.80 | 7.75 | 7.72 | 8.19 | 3.68 |
| End Cover | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | |
| Bearing | Deep Groove Ball Bearing | Deep Groove Ball Bearing | Deep Groove Ball Bearing | Deep Groove Ball Bearing | Deep Groove Ball Bearing | |
| Magnet | Sinter NdFeB | Sinter NdFeB | Sinter NdFeB | Sinter NdFeB | Sinter NdFeB | |
| Shaft | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | |
| Outer diameter | mm | 36 | 36 | 36 | 36 | 36 |
| Motor length | mm | 60 | 60 | 60 | 60 | 60 |
| Winding Connection | Star | Star | Star | Star | Star shape | |
| Insulation Class | B | B | B | B | B | |
| Duty Type | S2 | S2 | S2 | S2 | S1 | |
| Feedback Method | Hall Sensors | Hall Sensors | Hall Sensors | Hall Sensors | Hall Sensors | |
| Commutation Angle | 120° | 120° | 120° | 120° | 120° | |
| Insulation strength (withstand voltage) | 500VAC/1KHz/1mA/1s | 500VAC/1KHz/1mA/1s | 500VAC/1KHz/1mA/1s | 500VAC/1KHz/1mA/1s | 500VAC/1KHz/1mA/1s |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
| Parameter | Unit | 36ZWWC60-18 |
|---|---|---|
| Pole Pairs | 1 | |
| Insulation resistance | MΩ/500VDC | 100 |
| Weight | gr | 270 |
| Rated voltage | V | 18 |
| Nominal power | W | 68 |
| Nominal torque | mNm | 70 |
| Nominal speed | RPM | 7340 |
| Nominal current | A | 4.97 |
| No-load speed | RPM | 10000 |
| No-load current | A | 0.37 |
| Motor Efficiency | % | 76 |
| Phase resistance | Ω | 0.6 |
| Noise (Ambient noise 20db, test distance 1M) | dB | ＜50 |
| Case – Environmental thermal resistance (no load) | K/W | 0.42 |
| Motor Thermal Time Constant(No Load) | S | 1350 |
| Ambient temperature | °C | 21.1 |
| Maximum Winding Temperature(No Load) | °C | 49.4 |
| Torque Constant | mN·m/A | 14.08 |
| Back-EMF Constant /Peak Value | V/Krpm | 2.09 |
| Back-EMF constant (RMS) | V/Krpm | 1.47 |
| Peak Torque | mNm | 422.47 |
| Peak current | A | 30 |
| Phase inductance | mH | 0.08 |
| Rotor inertia | g·cm² | 39 |
| Mechanical Time Constant | ms | 11.80 |
| End Cover | Stainless Steel | |
| Bearing | Deep Groove Ball Bearing | |
| Magnet | Sinter NdFeB | |
| Shaft | Carbon Steel | |
| Outer diameter | mm | 36 |
| Motor length | mm | 60 |
| Winding Connection | Star | |
| Insulation Class | B | |
| Duty Type | S2 | |
| Feedback Method | Hall Sensors | |
| Commutation Angle | 120° | |
| Insulation strength (withstand voltage) | 500VAC/1KHz/1mA/1s |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
| Parameter | Unit | 36ZWWC60-24 |
|---|---|---|
| Pole Pairs | 1 | |
| Insulation resistance | MΩ/500VDC | 100 |
| Weight | gr | 270 |
| Rated voltage | V | 24 |
| Nominal power | W | 69 |
| Nominal torque | mNm | 70 |
| Nominal speed | RPM | 9345 |
| Nominal current | A | 3.78 |
| No-load speed | RPM | 11000 |
| No-load current | A | 0.37 |
| Motor Efficiency | % | 76 |
| Phase resistance | Ω | 0.68 |
| Noise (Ambient noise 20db, test distance 1M) | dB | ＜50 |
| Case – Environmental thermal resistance (no load) | K/W | 0.43 |
| Motor Thermal Time Constant(No Load) | S | 1350 |
| Ambient temperature | °C | 23.1 |
| Maximum Winding Temperature(No Load) | °C | 52.9 |
| Torque Constant | mN·m/A | 18.50 |
| Back-EMF Constant /Peak Value | V/Krpm | 2.74 |
| Back-EMF constant (RMS) | V/Krpm | 1.94 |
| Peak Torque | mNm | 653.09 |
| Peak current | A | 35 |
| Phase inductance | mH | 0.1 |
| Rotor inertia | g·cm² | 39 |
| Mechanical Time Constant | ms | 7.75 |
| End Cover | Stainless Steel | |
| Bearing | Deep Groove Ball Bearing | |
| Magnet | Sinter NdFeB | |
| Shaft | Carbon Steel | |
| Outer diameter | mm | 36 |
| Motor length | mm | 60 |
| Winding Connection | Star | |
| Insulation Class | B | |
| Duty Type | S2 | |
| Feedback Method | Hall Sensors | |
| Commutation Angle | 120° | |
| Insulation strength (withstand voltage) | 500VAC/1KHz/1mA/1s |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
| Parameter | Unit | 36ZWWC60-36 |
|---|---|---|
| Pole Pairs | 1 | |
| Insulation resistance | MΩ/500VDC | 100 |
| Weight | gr | 270 |
| Rated voltage | V | 36 |
| Nominal power | W | 74 |
| Nominal torque | mNm | 70 |
| Nominal speed | RPM | 10000 |
| Nominal current | A | 2.59 |
| No-load speed | RPM | 11500 |
| No-load current | A | 0.22 |
| Motor Efficiency | % | 79.5 |
| Phase resistance | Ω | 1.45 |
| Noise (Ambient noise 20db, test distance 1M) | dB | ＜50 |
| Case – Environmental thermal resistance (no load) | K/W | 0.44 |
| Motor Thermal Time Constant(No Load) | S | 2700 |
| Ambient temperature | °C | 20.1 |
| Maximum Winding Temperature(No Load) | °C | 52.8 |
| Torque Constant | mN·m/A | 27.07 |
| Back-EMF Constant /Peak Value | V/Krpm | 4.01 |
| Back-EMF constant (RMS) | V/Krpm | 2.83 |
| Peak Torque | mNm | 672.16 |
| Peak current | A | 25 |
| Phase inductance | mH | 0.19 |
| Rotor inertia | g·cm² | 39 |
| Mechanical Time Constant | ms | 7.72 |
| End Cover | Stainless Steel | |
| Bearing | Deep Groove Ball Bearing | |
| Magnet | Sinter NdFeB | |
| Shaft | Carbon Steel | |
| Outer diameter | mm | 36 |
| Motor length | mm | 60 |
| Winding Connection | Star | |
| Insulation Class | B | |
| Duty Type | S2 | |
| Feedback Method | Hall Sensors | |
| Commutation Angle | 120° | |
| Insulation strength (withstand voltage) | 500VAC/1KHz/1mA/1s |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
| Parameter | Unit | 36ZWWC60-48 |
|---|---|---|
| Pole Pairs | 1 | |
| Insulation resistance | MΩ/500VDC | 100 |
| Weight | gr | 270 |
| Rated voltage | V | 48 |
| Nominal power | W | 85 |
| Nominal torque | mNm | 70 |
| Nominal speed | RPM | 11700 |
| Nominal current | A | 2.21 |
| No-load speed | RPM | 13000 |
| No-load current | A | 0.2 |
| Motor Efficiency | % | 80 |
| Phase resistance | Ω | 2.1 |
| Noise (Ambient noise 20db, test distance 1M) | dB | ＜50 |
| Case – Environmental thermal resistance (no load) | K/W | 0.36 |
| Motor Thermal Time Constant(No Load) | S | 1080 |
| Ambient temperature | °C | 20.4 |
| Maximum Winding Temperature(No Load) | °C | 50.8 |
| Torque Constant | mN·m/A | 31.62 |
| Back-EMF Constant /Peak Value | V/Krpm | 4.68 |
| Back-EMF constant (RMS) | V/Krpm | 3.31 |
| Peak Torque | mNm | 722.82 |
| Peak current | A | 23 |
| Phase inductance | mH | 0.27 |
| Rotor inertia | g·cm² | 39 |
| Mechanical Time Constant | ms | 8.19 |
| End Cover | Stainless Steel | |
| Bearing | Deep Groove Ball Bearing | |
| Magnet | Sinter NdFeB | |
| Shaft | Carbon Steel | |
| Outer diameter | mm | 36 |
| Motor length | mm | 60 |
| Winding Connection | Star | |
| Insulation Class | B | |
| Duty Type | S2 | |
| Feedback Method | Hall Sensors | |
| Commutation Angle | 120° | |
| Insulation strength (withstand voltage) | 500VAC/1KHz/1mA/1s |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
| Parameter | Unit | 36ZWWC60-24-2 |
|---|---|---|
| Pole Pairs | 2 | |
| Insulation resistance | MΩ/500VDC | 100 |
| Weight | gr | 270 |
| Rated voltage | V | 24 |
| Nominal power | W | 85 |
| Nominal torque | mNm | 100 |
| Nominal speed | RPM | 8100 |
| Nominal current | A | 4.80 |
| No-load speed | RPM | 10300 |
| No-load current | A | 0.36 |
| Motor Efficiency | % | 84.4 |
| Phase resistance | Ω | 0.41 |
| Noise (Ambient noise 20db, test distance 1M) | dB | ＜50 |
| Case – Environmental thermal resistance (no load) | K/W | 0.58 |
| Motor Thermal Time Constant(No Load) | S | 1330 |
| Ambient temperature | °C | 19.5 |
| Maximum Winding Temperature(No Load) | °C | 69.3 |
| Torque Constant | mN·m/A | 20.83 |
| Back-EMF Constant /Peak Value | V/Krpm | 3.08 |
| Back-EMF constant (RMS) | V/Krpm | 2.18 |
| Peak Torque | mNm | 1219.51 |
| Peak current | A | 59 |
| Phase inductance | mH | 0.042 |
| Rotor inertia | g·cm² | 39 |
| Mechanical Time Constant | ms | 3.68 |
| End Cover | Stainless Steel | |
| Bearing | Deep Groove Ball Bearing | |
| Magnet | Sinter NdFeB | |
| Shaft | Carbon Steel | |
| Outer diameter | mm | 36 |
| Motor length | mm | 60 |
| Winding Connection | Star shape | |
| Insulation Class | B | |
| Duty Type | S1 | |
| Feedback Method | Hall Sensors | |
| Commutation Angle | 120° | |
| Insulation strength (withstand voltage) | 500VAC/1KHz/1mA/1s |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.