Name: Stand Alone Stepper Electronics 3 - KOCO MOTION
SKU: Stand Alone Stepper Electronics 3

Motor Characteristics

Parameter	Unit	DS-OLS8-FPD	DS-OLS7-FRS4	DS-OLS8-FRS4	DS-OLS10-FSC	DS-CLS3-FETC-4I
Applied Motor		DS-OLS8-FPD can operate Max. 7.8A of motor	Adapted to two-phase hybrid stepping motor,DS-OLS7-FRS4 Maximum fit 3.2A	Adapted to two-phase hybrid stepping motor,DS-OLS8-FRS4 Maximum fit 6.5A	Adapted to two-phase hybrid stepping motor,DS-OLS10-FSC Maximum fit 4.5A	Adapted to two-phase hybrid stepping motor,DS-OLS10-FSC Maximum fit 4.5A
Power Supply	V	24 – 72V DC	24 – 48V DC	24 – 72V DC	24 – 48V DC	24 – 48V DC
Output Current	A	2.8A-7.8A/Phase（Peak Value）	0.1A-3.2A/ phase	0.1A-6.5A/Phase	1.0A-4.5A/Phase (Peak Value)	1.0A-4.5A/Phase (Peak Value)
Drive Method		Bi-Polar PWM drive	Full-bridge bipolar PWM driver	Full-bridge bipolar PWM driver	Full-Bridge Bi-polar PWM driver	Full-Bridge Bi-polar PWM driver
Input Signal (Pulse Signal,Offline Signal,Direction Signal)		Optocoupler input voltage H = 3.5 – 26V , L = 0 – 0.8V,Conduction current 6-15mA	Optocoupler input voltage H = 3.5 – 26V , L = 0 – 0.8V, On current 6-15mA	Optocoupler input voltage H = 3.5 – 26V , L = 0 – 0.8V,On current 6-15mA	Optocoupler input voltage H = 3.5 – 26V , L = 0 – 0.8V,On current 6-15mA	Optocoupler input voltage H = 3.5 – 26V , L = 0 – 0.8V,On current 6-15mA
Output Signal Alarm output		Photoelectric isolation output, maximum withstand voltage 30VDC, maximum saturation current 50mA	Optically isolated output, highest withstand voltage30VD, Maximum saturation current 50mA	Optically isolated output, highest withstand voltage30VDC，Maximum saturation current 50mA	Optically isolated output, highest withstand voltage30VDC，Maximum saturation current 50mA	Optically isolated output, highest withstand voltage30VDC，Maximum saturation current 50mA
Size	mm	118 × 78 × 34	94 × 77 × 27mm（Including terminal block）	118 × 78 × 34mm	118 × 78 × 34mm	118 × 78 × 34mm
Weight	g	About 300	About 175 g	About 300g	About 300g	About 300g
Operation Environment Precaution		Avoid dust, oil mist and corrosive gas	Avoid dust, oil mist and corrosive gases	Avoid dust, oil mist and corrosive gases	Avoid dust, oil mist and corrosive gases	Avoid dust, oil mist and corrosive gases
Humidity		< 85 % RH, No condensation	< 85 % RH, No condensation	< 85 % RH, No condensation	< 85 % RH, No condensation	< 85 % RH, No condensation
Temperature	°C	0 – +40	0 – +40	0- +40	0 – +40	0 – +40
Cooling		Installed in a ventilated environment	Installed in a ventilated environment	Installed in a ventilated environment	Installed in a ventilated environment	Installed in a ventilated environment

Features

Input power : DC 24V-48V Output rated current (peak value): 0~4.5A/phase Pulse direction and RS485 control mode are optional to support MODBUS RTU Output current : 0 – 4.5A Pulse / Direction, RS-485 communication selection support MODBUS-RTU protocol Torque control mode Encoder signal output Max. Output current : 6.5A PWM constant current bipolar micro-stepping drive Support CANopen communication protocol, support control mode PP, PV, HM, PT Optically isolated inputs Motor short circuit protection, under-voltage protection, over-voltage protection, over-current protection, etc. Exquisite design, low noise and low vibration Support EtherCAT communication protocol, support control mode PP, PV, HM, CSP, CVS

Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.

Get in touch with us

info@kocomotion.de

Product

Quantity

Company(Required)

Phone

Name

E-Mail(Required)

Adress

Message

CAPTCHA

Name

This field is for validation purposes and should be left unchanged.

Motor Characteristics

Parameter	Unit	DS-OLS8-FPD
Applied Motor		DS-OLS8-FPD can operate Max. 7.8A of motor
Power Supply	V	24 – 72V DC
Output Current	A	2.8A-7.8A/Phase（Peak Value）
Drive Method		Bi-Polar PWM drive
Input Signal (Pulse Signal,Offline Signal,Direction Signal)		Optocoupler input voltage H = 3.5 – 26V , L = 0 – 0.8V,Conduction current 6-15mA
Output Signal Alarm output		Photoelectric isolation output, maximum withstand voltage 30VDC, maximum saturation current 50mA
Size	mm	118 × 78 × 34
Weight	g	About 300
Operation Environment Precaution		Avoid dust, oil mist and corrosive gas
Humidity		< 85 % RH, No condensation
Temperature	°C	0 – +40
Cooling		Installed in a ventilated environment

Features

Input power : DC 24V-48V Output rated current (peak value): 0~4.5A/phase Pulse direction and RS485 control mode are optional to support MODBUS RTU Output current : 0 – 4.5A Pulse / Direction, RS-485 communication selection support MODBUS-RTU protocol Torque control mode Encoder signal output Max. Output current : 6.5A PWM constant current bipolar micro-stepping drive Support CANopen communication protocol, support control mode PP, PV, HM, PT Optically isolated inputs Motor short circuit protection, under-voltage protection, over-voltage protection, over-current protection, etc. Exquisite design, low noise and low vibration Support EtherCAT communication protocol, support control mode PP, PV, HM, CSP, CVS

Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.

DS-OLS8-FPD

DS-OLS8-FPD-Installation.png (jpeg, 138.42K)