Specification
| Parameter | Unit | TC 80 1,5 21 | TC 80 1,5 15 | TC 80 2,8 21 | TC 80 2,8 15 | TC 80 4 15 | TC 80 4 17 |
|---|---|---|---|---|---|---|---|
| Continuous stall torque | Nm | 1.74 | 1.74 | 2.96 | 2.96 | 4 | 4 |
| Maximum working speed 230VAC | rpm | 5000 | 3900 | 5000 | 3900 | 3900 | – |
| Maximum working speed 400VAC | – | 5000 | – | 5000 | 5000 | 5000 | |
| Torque Constant | Nm/Arms | 0.526 | 0.91 | 0.526 | 0.91 | 0.91 | 1.6 |
| Voltage constant | Vrms/Krpm | 31.8 | 55 | 31.8 | 55 | 55 | 96 |
| Winding resistance | Ω | 2.3 | 6.5 | 0.99 | 3 | 1.9 | 6.5 |
| Winding inductance | mH | 7.4 | 22.2 | 4.4 | 13.2 | 8.9 | 28.6 |
| Electrical time constant | ms | 3.2 | 3.4 | 4.4 | 4.4 | 4.7 | 4.4 |
| Thermal resistance | °C/W | 1.67 | 1.67 | 1.32 | 1.32 | 1 | 1 |
| Mechanical time constant | ms | 0.8 | 0.75 | 0.62 | 0.63 | 0.54 | 0.6 |
| Rotor Inertia without brake and without feedback | kg·cm² | 0.64 | 0.64 | 1.16 | 1.16 | 1.58 | 1.58 |
| Peak Torque | Nm | 4.5 | 4.5 | 8.4 | 8.4 | 12 | 12 |
| Mass without holding brake | Kg | 2.25 | 2.25 | 3.05 | 3.05 | 4.1 | 4.1 |
| Mass with holding brake | Kg | 2.97 | 2.97 | 3.77 | 3.77 | 4.82 | 4.82 |
| Maximum axial shaft load applied on the shaft’s center | N | 110 | 110 | 110 | 110 | 110 | 110 |
| Maximun radial shaft load applied on the shaft’s center | N | 350 | 350 | 350 | 350 | 350 | 350 |
| Motor length (without brake) | mm | 128 | 128 | 153 | 153 | 178 | 178 |
| Motor length (with brake) | mm | 170 | 170 | 195 | 195 | 220 | 220 |
| Nominal torque | Nm | 1.53 | 1.53 | 2.55 | 2.55 | 3.4 | 3.4 |
| Rated voltage | V | 230 | 400 | 230 | 400 | 230 | 400 |
| Nominal power | W | 480 | 480 | 800 | 800 | 1068 | 1068 |
| Continuous stall current | Arms | 3.31 | 1.91 | 5.63 | 3.25 | 4.4 | 2.5 |
| Maximun Current | Arms | 8.55 | 4.95 | 15.97 | 9.23 | 13.19 | 7.5 |
| Nominal current | Arms | 2.99 | 1.73 | 4.99 | 2.88 | 3.85 | 2.19 |
| Nominal speed | rpm | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 |
Family Specification
| Family Specification | Unit | TC 80 |
|---|---|---|
| Time Rating | Continuous | |
| Certification | CE | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Recommendation | Rated output with 250 x 250 x 6 mm metallic heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing | |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 |
Family Overview
| Family Overview | Unit | TC 80 |
|---|---|---|
| Flange dimensions | mm | 80 |
| Rated Output Power | Watt | 480 – 1068 |
| Rated Torque | Nm | 1,53 – 3,4 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
TC 80
datasheet
| Parameter | Unit | TC 80 1,5 21 |
|---|---|---|
| Continuous stall torque | Nm | 1.74 |
| Maximum working speed 230VAC | rpm | 5000 |
| Maximum working speed 400VAC | – | |
| Torque Constant | Nm/Arms | 0.526 |
| Voltage constant | Vrms/Krpm | 31.8 |
| Winding resistance | Ω | 2.3 |
| Winding inductance | mH | 7.4 |
| Electrical time constant | ms | 3.2 |
| Thermal resistance | °C/W | 1.67 |
| Mechanical time constant | ms | 0.8 |
| Rotor Inertia without brake and without feedback | kg·cm² | 0.64 |
| Peak Torque | Nm | 4.5 |
| Mass without holding brake | Kg | 2.25 |
| Mass with holding brake | Kg | 2.97 |
| Maximum axial shaft load applied on the shaft’s center | N | 110 |
| Maximun radial shaft load applied on the shaft’s center | N | 350 |
| Motor length (without brake) | mm | 128 |
| Motor length (with brake) | mm | 170 |
| Nominal torque | Nm | 1.53 |
| Rated voltage | V | 230 |
| Nominal power | W | 480 |
| Continuous stall current | Arms | 3.31 |
| Maximun Current | Arms | 8.55 |
| Nominal current | Arms | 2.99 |
| Nominal speed | rpm | 3000 |
Family Specification
| Family Specification | Unit | TC 80 1,5 21 |
|---|---|---|
| Time Rating | Continuous | |
| Certification | CE | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Recommendation | Rated output with 250 x 250 x 6 mm metallic heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing | |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 |
Family Overview
| Family Overview | Unit | TC 80 1,5 21 |
|---|---|---|
| Flange dimensions | mm | 80 |
| Rated Output Power | Watt | 480 – 1068 |
| Rated Torque | Nm | 1,53 – 3,4 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
TC 80
datasheet
| Parameter | Unit | TC 80 1,5 15 |
|---|---|---|
| Continuous stall torque | Nm | 1.74 |
| Maximum working speed 230VAC | rpm | 3900 |
| Maximum working speed 400VAC | 5000 | |
| Torque Constant | Nm/Arms | 0.91 |
| Voltage constant | Vrms/Krpm | 55 |
| Winding resistance | Ω | 6.5 |
| Winding inductance | mH | 22.2 |
| Electrical time constant | ms | 3.4 |
| Thermal resistance | °C/W | 1.67 |
| Mechanical time constant | ms | 0.75 |
| Rotor Inertia without brake and without feedback | kg·cm² | 0.64 |
| Peak Torque | Nm | 4.5 |
| Mass without holding brake | Kg | 2.25 |
| Mass with holding brake | Kg | 2.97 |
| Maximum axial shaft load applied on the shaft’s center | N | 110 |
| Maximun radial shaft load applied on the shaft’s center | N | 350 |
| Motor length (without brake) | mm | 128 |
| Motor length (with brake) | mm | 170 |
| Nominal torque | Nm | 1.53 |
| Rated voltage | V | 400 |
| Nominal power | W | 480 |
| Continuous stall current | Arms | 1.91 |
| Maximun Current | Arms | 4.95 |
| Nominal current | Arms | 1.73 |
| Nominal speed | rpm | 3000 |
Family Specification
| Family Specification | Unit | TC 80 1,5 15 |
|---|---|---|
| Time Rating | Continuous | |
| Certification | CE | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Recommendation | Rated output with 250 x 250 x 6 mm metallic heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing | |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 |
Family Overview
| Family Overview | Unit | TC 80 1,5 15 |
|---|---|---|
| Flange dimensions | mm | 80 |
| Rated Output Power | Watt | 480 – 1068 |
| Rated Torque | Nm | 1,53 – 3,4 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
TC 80
datasheet
| Parameter | Unit | TC 80 2,8 21 |
|---|---|---|
| Continuous stall torque | Nm | 2.96 |
| Maximum working speed 230VAC | rpm | 5000 |
| Maximum working speed 400VAC | – | |
| Torque Constant | Nm/Arms | 0.526 |
| Voltage constant | Vrms/Krpm | 31.8 |
| Winding resistance | Ω | 0.99 |
| Winding inductance | mH | 4.4 |
| Electrical time constant | ms | 4.4 |
| Thermal resistance | °C/W | 1.32 |
| Mechanical time constant | ms | 0.62 |
| Rotor Inertia without brake and without feedback | kg·cm² | 1.16 |
| Peak Torque | Nm | 8.4 |
| Mass without holding brake | Kg | 3.05 |
| Mass with holding brake | Kg | 3.77 |
| Maximum axial shaft load applied on the shaft’s center | N | 110 |
| Maximun radial shaft load applied on the shaft’s center | N | 350 |
| Motor length (without brake) | mm | 153 |
| Motor length (with brake) | mm | 195 |
| Nominal torque | Nm | 2.55 |
| Rated voltage | V | 230 |
| Nominal power | W | 800 |
| Continuous stall current | Arms | 5.63 |
| Maximun Current | Arms | 15.97 |
| Nominal current | Arms | 4.99 |
| Nominal speed | rpm | 3000 |
Family Specification
| Family Specification | Unit | TC 80 2,8 21 |
|---|---|---|
| Time Rating | Continuous | |
| Certification | CE | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Recommendation | Rated output with 250 x 250 x 6 mm metallic heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing | |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 |
Family Overview
| Family Overview | Unit | TC 80 2,8 21 |
|---|---|---|
| Flange dimensions | mm | 80 |
| Rated Output Power | Watt | 480 – 1068 |
| Rated Torque | Nm | 1,53 – 3,4 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
TC 80
datasheet
| Parameter | Unit | TC 80 2,8 15 |
|---|---|---|
| Continuous stall torque | Nm | 2.96 |
| Maximum working speed 230VAC | rpm | 3900 |
| Maximum working speed 400VAC | 5000 | |
| Torque Constant | Nm/Arms | 0.91 |
| Voltage constant | Vrms/Krpm | 55 |
| Winding resistance | Ω | 3 |
| Winding inductance | mH | 13.2 |
| Electrical time constant | ms | 4.4 |
| Thermal resistance | °C/W | 1.32 |
| Mechanical time constant | ms | 0.63 |
| Rotor Inertia without brake and without feedback | kg·cm² | 1.16 |
| Peak Torque | Nm | 8.4 |
| Mass without holding brake | Kg | 3.05 |
| Mass with holding brake | Kg | 3.77 |
| Maximum axial shaft load applied on the shaft’s center | N | 110 |
| Maximun radial shaft load applied on the shaft’s center | N | 350 |
| Motor length (without brake) | mm | 153 |
| Motor length (with brake) | mm | 195 |
| Nominal torque | Nm | 2.55 |
| Rated voltage | V | 400 |
| Nominal power | W | 800 |
| Continuous stall current | Arms | 3.25 |
| Maximun Current | Arms | 9.23 |
| Nominal current | Arms | 2.88 |
| Nominal speed | rpm | 3000 |
Family Specification
| Family Specification | Unit | TC 80 2,8 15 |
|---|---|---|
| Time Rating | Continuous | |
| Certification | CE | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Recommendation | Rated output with 250 x 250 x 6 mm metallic heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing | |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 |
Family Overview
| Family Overview | Unit | TC 80 2,8 15 |
|---|---|---|
| Flange dimensions | mm | 80 |
| Rated Output Power | Watt | 480 – 1068 |
| Rated Torque | Nm | 1,53 – 3,4 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
TC 80
datasheet
| Parameter | Unit | TC 80 4 15 |
|---|---|---|
| Continuous stall torque | Nm | 4 |
| Maximum working speed 230VAC | rpm | 3900 |
| Maximum working speed 400VAC | 5000 | |
| Torque Constant | Nm/Arms | 0.91 |
| Voltage constant | Vrms/Krpm | 55 |
| Winding resistance | Ω | 1.9 |
| Winding inductance | mH | 8.9 |
| Electrical time constant | ms | 4.7 |
| Thermal resistance | °C/W | 1 |
| Mechanical time constant | ms | 0.54 |
| Rotor Inertia without brake and without feedback | kg·cm² | 1.58 |
| Peak Torque | Nm | 12 |
| Mass without holding brake | Kg | 4.1 |
| Mass with holding brake | Kg | 4.82 |
| Maximum axial shaft load applied on the shaft’s center | N | 110 |
| Maximun radial shaft load applied on the shaft’s center | N | 350 |
| Motor length (without brake) | mm | 178 |
| Motor length (with brake) | mm | 220 |
| Nominal torque | Nm | 3.4 |
| Rated voltage | V | 230 |
| Nominal power | W | 1068 |
| Continuous stall current | Arms | 4.4 |
| Maximun Current | Arms | 13.19 |
| Nominal current | Arms | 3.85 |
| Nominal speed | rpm | 3000 |
Family Specification
| Family Specification | Unit | TC 80 4 15 |
|---|---|---|
| Time Rating | Continuous | |
| Certification | CE | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Recommendation | Rated output with 250 x 250 x 6 mm metallic heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing | |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 |
Family Overview
| Family Overview | Unit | TC 80 4 15 |
|---|---|---|
| Flange dimensions | mm | 80 |
| Rated Output Power | Watt | 480 – 1068 |
| Rated Torque | Nm | 1,53 – 3,4 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
TC 80
datasheet
| Parameter | Unit | TC 80 4 17 |
|---|---|---|
| Continuous stall torque | Nm | 4 |
| Maximum working speed 230VAC | rpm | – |
| Maximum working speed 400VAC | 5000 | |
| Torque Constant | Nm/Arms | 1.6 |
| Voltage constant | Vrms/Krpm | 96 |
| Winding resistance | Ω | 6.5 |
| Winding inductance | mH | 28.6 |
| Electrical time constant | ms | 4.4 |
| Thermal resistance | °C/W | 1 |
| Mechanical time constant | ms | 0.6 |
| Rotor Inertia without brake and without feedback | kg·cm² | 1.58 |
| Peak Torque | Nm | 12 |
| Mass without holding brake | Kg | 4.1 |
| Mass with holding brake | Kg | 4.82 |
| Maximum axial shaft load applied on the shaft’s center | N | 110 |
| Maximun radial shaft load applied on the shaft’s center | N | 350 |
| Motor length (without brake) | mm | 178 |
| Motor length (with brake) | mm | 220 |
| Nominal torque | Nm | 3.4 |
| Rated voltage | V | 400 |
| Nominal power | W | 1068 |
| Continuous stall current | Arms | 2.5 |
| Maximun Current | Arms | 7.5 |
| Nominal current | Arms | 2.19 |
| Nominal speed | rpm | 3000 |
Family Specification
| Family Specification | Unit | TC 80 4 17 |
|---|---|---|
| Time Rating | Continuous | |
| Certification | CE | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Recommendation | Rated output with 250 x 250 x 6 mm metallic heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing | |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 |
Family Overview
| Family Overview | Unit | TC 80 4 17 |
|---|---|---|
| Flange dimensions | mm | 80 |
| Rated Output Power | Watt | 480 – 1068 |
| Rated Torque | Nm | 1,53 – 3,4 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.