Specification
| Parameter | Unit | TC 60 0,65 21 | TC 60 1,3 21 | TC 60 1,3 15 |
|---|---|---|---|---|
| Continuous stall torque | Nm | 0.69 | 1.31 | 1.31 |
| Maximum working speed 24VDC | rpm | – | – | 5000 |
| Maximum working speed 230VAC | rpm | 5000 | 5000 | 3900 |
| Maximum working speed 400VAC | – | – | 5000 | |
| Torque Constant | Nm/Arms | 0.526 | 0.526 | 0.91 |
| Voltage constant | Vrms/Krpm | 31.8 | 31.8 | 55 |
| Winding resistance | Ω | 12.9 | 4.2 | 14.4 |
| Winding inductance | mH | 26.5 | 14.9 | 41.8 |
| Electrical time constant | ms | 2.05 | 3.55 | 2.9 |
| Thermal resistance | °C/W | 1.89 | 1.41 | 1.41 |
| Mechanical time constant | ms | 0.91 | 0.55 | 0.63 |
| Peak Torque | Nm | 1.95 | 3.9 | 3.9 |
| Rotor Inertia without brake and without feedback | kg·cm² | 0.13 | 0.24 | 0.24 |
| Mass without holding brake | Kg | 1.1 | 1.5 | 1.5 |
| Mass with holding brake | Kg | 1.5 | 1.9 | 1.9 |
| Maximum axial shaft load applied on the shaft’s center | N | 70 | 70 | 70 |
| Maximun radial shaft load applied on the shaft’s center | N | 220 | 220 | 220 |
| Motor length (without brake) | mm | 111 | 136 | 136 |
| Motor length (with brake) | mm | 148 | 173 | 173 |
| Nominal torque | Nm | 0.64 | 1.18 | 1.18 |
| Rated voltage | V | 230 | 230 | 230 |
| Nominal power | W | 200 | 370 | 370 |
| Continuous stall current | Arms | 1.31 | 2.49 | 1.44 |
| Maximun Current | Arms | 3.71 | 7.41 | 4.29 |
| Nominal current | Arms | 1.25 | 2.31 | 1.33 |
| Nominal speed | rpm | 3000 | 3000 | 3000 |
Family Specification
| Family Specification | Unit | TC 60 |
|---|---|---|
| Time Rating | Continuous | |
| Certification | CE | |
| Recommendation | Rated output with 250 x 250 x 6 mm aluminum heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 |
Family Overview
| Family Overview | Unit | TC 60 |
|---|---|---|
| Flange dimensions | mm | 60 |
| Rated Output Power | Watt | 200 – 370 |
| Rated Torque | Nm | 0,64 – 1,18 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
| Parameter | Unit | TC 60 0,65 21 |
|---|---|---|
| Continuous stall torque | Nm | 0.69 |
| Maximum working speed 24VDC | rpm | – |
| Maximum working speed 230VAC | rpm | 5000 |
| Maximum working speed 400VAC | – | |
| Torque Constant | Nm/Arms | 0.526 |
| Voltage constant | Vrms/Krpm | 31.8 |
| Winding resistance | Ω | 12.9 |
| Winding inductance | mH | 26.5 |
| Electrical time constant | ms | 2.05 |
| Thermal resistance | °C/W | 1.89 |
| Mechanical time constant | ms | 0.91 |
| Peak Torque | Nm | 1.95 |
| Rotor Inertia without brake and without feedback | kg·cm² | 0.13 |
| Mass without holding brake | Kg | 1.1 |
| Mass with holding brake | Kg | 1.5 |
| Maximum axial shaft load applied on the shaft’s center | N | 70 |
| Maximun radial shaft load applied on the shaft’s center | N | 220 |
| Motor length (without brake) | mm | 111 |
| Motor length (with brake) | mm | 148 |
| Nominal torque | Nm | 0.64 |
| Rated voltage | V | 230 |
| Nominal power | W | 200 |
| Continuous stall current | Arms | 1.31 |
| Maximun Current | Arms | 3.71 |
| Nominal current | Arms | 1.25 |
| Nominal speed | rpm | 3000 |
Family Specification
| Family Specification | Unit | TC 60 0,65 21 |
|---|---|---|
| Time Rating | Continuous | |
| Certification | CE | |
| Recommendation | Rated output with 250 x 250 x 6 mm aluminum heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 |
Family Overview
| Family Overview | Unit | TC 60 0,65 21 |
|---|---|---|
| Flange dimensions | mm | 60 |
| Rated Output Power | Watt | 200 – 370 |
| Rated Torque | Nm | 0,64 – 1,18 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
| Parameter | Unit | TC 60 1,3 21 |
|---|---|---|
| Continuous stall torque | Nm | 1.31 |
| Maximum working speed 24VDC | rpm | – |
| Maximum working speed 230VAC | rpm | 5000 |
| Maximum working speed 400VAC | – | |
| Torque Constant | Nm/Arms | 0.526 |
| Voltage constant | Vrms/Krpm | 31.8 |
| Winding resistance | Ω | 4.2 |
| Winding inductance | mH | 14.9 |
| Electrical time constant | ms | 3.55 |
| Thermal resistance | °C/W | 1.41 |
| Mechanical time constant | ms | 0.55 |
| Peak Torque | Nm | 3.9 |
| Rotor Inertia without brake and without feedback | kg·cm² | 0.24 |
| Mass without holding brake | Kg | 1.5 |
| Mass with holding brake | Kg | 1.9 |
| Maximum axial shaft load applied on the shaft’s center | N | 70 |
| Maximun radial shaft load applied on the shaft’s center | N | 220 |
| Motor length (without brake) | mm | 136 |
| Motor length (with brake) | mm | 173 |
| Nominal torque | Nm | 1.18 |
| Rated voltage | V | 230 |
| Nominal power | W | 370 |
| Continuous stall current | Arms | 2.49 |
| Maximun Current | Arms | 7.41 |
| Nominal current | Arms | 2.31 |
| Nominal speed | rpm | 3000 |
Family Specification
| Family Specification | Unit | TC 60 1,3 21 |
|---|---|---|
| Time Rating | Continuous | |
| Certification | CE | |
| Recommendation | Rated output with 250 x 250 x 6 mm aluminum heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 |
Family Overview
| Family Overview | Unit | TC 60 1,3 21 |
|---|---|---|
| Flange dimensions | mm | 60 |
| Rated Output Power | Watt | 200 – 370 |
| Rated Torque | Nm | 0,64 – 1,18 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
PDF Downloads
| Parameter | Unit | TC 60 1,3 15 |
|---|---|---|
| Continuous stall torque | Nm | 1.31 |
| Maximum working speed 24VDC | rpm | 5000 |
| Maximum working speed 230VAC | rpm | 3900 |
| Maximum working speed 400VAC | 5000 | |
| Torque Constant | Nm/Arms | 0.91 |
| Voltage constant | Vrms/Krpm | 55 |
| Winding resistance | Ω | 14.4 |
| Winding inductance | mH | 41.8 |
| Electrical time constant | ms | 2.9 |
| Thermal resistance | °C/W | 1.41 |
| Mechanical time constant | ms | 0.63 |
| Peak Torque | Nm | 3.9 |
| Rotor Inertia without brake and without feedback | kg·cm² | 0.24 |
| Mass without holding brake | Kg | 1.5 |
| Mass with holding brake | Kg | 1.9 |
| Maximum axial shaft load applied on the shaft’s center | N | 70 |
| Maximun radial shaft load applied on the shaft’s center | N | 220 |
| Motor length (without brake) | 136 | |
| Motor length (with brake) | mm | 173 |
| Nominal torque | Nm | 1.18 |
| Rated voltage | V | 230 |
| Nominal power | W | 370 |
| Continuous stall current | Arms | 1.44 |
| Maximun Current | Arms | 4.29 |
| Nominal current | Arms | 1.33 |
| Nominal speed | rpm | 3000 |
Family Specification
| Family Specification | Unit | TC 60 1,3 15 |
|---|---|---|
| Time Rating | Continuous | |
| Certification | CE | |
| Recommendation | Rated output with 250 x 250 x 6 mm aluminum heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 |
Family Overview
| Family Overview | Unit | TC 60 1,3 15 |
|---|---|---|
| Flange dimensions | mm | 60 |
| Rated Output Power | Watt | 200 – 370 |
| Rated Torque | Nm | 0,64 – 1,18 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.