Description
Flange dimensions: 80 mm
Rated Output Power: 480 – 1068 W
Rated Torque: 1,53 – 3,4 Nm
Rated Speed: 3000 rpm
| Parameter | Unit | TC 80 4 17 |
|---|---|---|
| Continous Stall Torque | Nm | 4 |
| Maximum working speed 230VAC | rpm | – |
| Maximum working speed 400VAC | 5000 | |
| Torque Constant | Nm/Arms | 1.6 |
| Voltage Constant | Vrms/Krpm | 96 |
| Winding resistance | Ω | 6.5 |
| Winding inductance | mH | 28.6 |
| Electrical time constant | ms | 4.4 |
| Thermal Resistance | °C/W | 1 |
| Mechanical time constant | ms | 0.6 |
| Rotor Inertia without brake and without feedback | kg·cm² | 1.58 |
| Peak Torque | Nm | 12 |
| Mass without holding brake | Kg | 4.1 |
| Mass with holding brake | Kg | 4.82 |
| Maximum axial shaft load applied on the shaft’s center | N | 110 |
| Maximun radial shaft load applied on the shaft’s center | N | 350 |
| Nominal Torque | Nm | 3.4 |
| Rated Voltage | V | 400 |
| Nominal power | W | 1068 |
| Continuous stall Current | Arms | 2.5 |
| Maximun Current | Arms | 7.5 |
| Nominal Current | Arms | 2.19 |
| Nominal working Speed | rpm | 3000 |
Family Specification
| Family Specification | Unit | TC 80 4 17 |
|---|---|---|
| Time Rating | Continuous | |
| Certification | CE | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Recommendation | Rated output with 250 x 250 x 6 mm metallic heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing | |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 |
Family Overview
| Family Overview | Unit | TC 80 4 17 |
|---|---|---|
| Flange dimensions | mm | 80 |
| Rated Output Power | Watt | 480 – 1068 |
| Rated Torque | Nm | 1,53 – 3,4 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.