Flange dimensions: 180 mm
Rated Output Power: 4700 – 8380 W
Rated Torque: 18,0 – 40,0 Nm
Rated Speed: 3000 rpm
Flange dimensions: 180 mm
Rated Output Power: 4700 – 8380 W
Rated Torque: 18,0 – 40,0 Nm
Rated Speed: 3000 rpm
| Parameter | Unit | T 180 35 17 |
|---|---|---|
| Continous Stall Torque | Nm | 39 |
| Peak Torque | Nm | 95 |
| Nominal Torque | Nm | 21 |
| Rated Voltage | V | 400 |
| Nominal power | W | 6600 |
| Continuous stall Current | Arms | 24.3 |
| Maximun Current | Arms | 59.2 |
| Nominal Current | Arms | 13.7 |
| Nominal working Speed | rpm | 3000 |
| Maximum working speed 230VAC | rpm | 2200 |
| Maximum working speed 400VAC | 3000 | |
| Torque Constant | Nm/Arms | 1.6 |
| Voltage Constant | Vrms/Krpm | 97 |
| Winding resistance | Ohm | 0.29 |
| Winding inductance | mH | 1.9 |
| Electrical time constant | ms | 6.6 |
| Thermal Resistance | °C/W | 0.27 |
| Mechanical timeconstant high rotor inertia | ms | 2.4 |
| Mechanical time constant low rotor inertia | ms | 1.7 |
| High rotor inertia (as an option) without brake and without feedback | kg·cm² | 141 |
| Low rotor inertia (as an option) without brake and without feedback | kg·cm² | 102.5 |
| Mass without holding brake | Kg | 36 |
| Mass with holding brake | Kg | 42 |
| Maximum axial shaft load applied on the shaft’s center | N | 510 |
| Maximun radial shaft load applied on the shaft’s center | N | 1700 |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
