Specification
| Parameter | Unit | TC 80 1,5 21 | TC 80 1,5 15 | TC 80 2,8 21 | TC 80 2,8 15 | TC 80 4 15 | TC 80 4 17 |
|---|---|---|---|---|---|---|---|
| Continous Stall Torque | Nm | 1.74 | 1.74 | 2.96 | 2.96 | 4 | 4 |
| Peak Torque | Nm | 4.5 | 4.5 | 8.4 | 8.4 | 12 | 12 |
| Nominal Torque | Nm | 1.53 | 1.53 | 2.55 | 2.55 | 3.4 | 3.4 |
| Rated Voltage | V | 230 | 400 | 230 | 400 | 230 | 400 |
| Nominal power | W | 480 | 480 | 800 | 800 | 1068 | 1068 |
| Continuous stall Current | Arms | 3.31 | 1.91 | 5.63 | 3.25 | 4.4 | 2.5 |
| Maximun Current | Arms | 8.55 | 4.95 | 15.97 | 9.23 | 13.19 | 7.5 |
| Nominal Current | Arms | 2.99 | 1.73 | 4.99 | 2.88 | 3.85 | 2.19 |
| Nominal working Speed | rpm | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 |
| Maximum working speed 230VAC | rpm | 5000 | 3900 | 5000 | 3900 | 3900 | – |
| Maximum working speed 400VAC | – | 5000 | – | 5000 | 5000 | 5000 | |
| Torque Constant | Nm/Arms | 0.526 | 0.91 | 0.526 | 0.91 | 0.91 | 1.6 |
| Voltage Constant | Vrms/Krpm | 31.8 | 55 | 31.8 | 55 | 55 | 96 |
| Winding resistance | Ω | 2.3 | 6.5 | 0.99 | 3 | 1.9 | 6.5 |
| Winding inductance | mH | 7.4 | 22.2 | 4.4 | 13.2 | 8.9 | 28.6 |
| Electrical time constant | ms | 3.2 | 3.4 | 4.4 | 4.4 | 4.7 | 4.4 |
| Thermal Resistance | °C/W | 1.67 | 1.67 | 1.32 | 1.32 | 1 | 1 |
| Mechanical time constant | ms | 0.8 | 0.75 | 0.62 | 0.63 | 0.54 | 0.6 |
| Rotor Inertia without brake and without feedback | kg·cm² | 0.64 | 0.64 | 1.16 | 1.16 | 1.58 | 1.58 |
| Mass without holding brake | Kg | 2.25 | 2.25 | 3.05 | 3.05 | 4.1 | 4.1 |
| Mass with holding brake | Kg | 2.97 | 2.97 | 3.77 | 3.77 | 4.82 | 4.82 |
| Maximum axial shaft load applied on the shaft’s center | N | 110 | 110 | 110 | 110 | 110 | 110 |
| Maximun radial shaft load applied on the shaft’s center | N | 350 | 350 | 350 | 350 | 350 | 350 |
Family Specification
| Family Specification | Unit | TC 80 |
|---|---|---|
| Time Rating | Continuous | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 | |
| Certification | CE | |
| Recommendation | Rated output with 250 x 250 x 6 mm metallic heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing |
Family Overview
| Family Overview | Unit | TC 80 |
|---|---|---|
| Flange dimensions | mm | 80 |
| Rated Output Power | Watt | 480 – 1068 |
| Rated Torque | Nm | 1,53 – 3,4 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
TC 80
datasheet
TC 80 1,5 21
TC 80 1,5 15
TC 80 2,8 21
TC 80 2,8 15
TC 80 4 15
TC 80 4 17
| Parameter | Unit | TC 80 1,5 21 |
|---|---|---|
| Continous Stall Torque | Nm | 1.74 |
| Peak Torque | Nm | 4.5 |
| Nominal Torque | Nm | 1.53 |
| Rated Voltage | V | 230 |
| Nominal power | W | 480 |
| Continuous stall Current | Arms | 3.31 |
| Maximun Current | Arms | 8.55 |
| Nominal Current | Arms | 2.99 |
| Nominal working Speed | rpm | 3000 |
| Maximum working speed 230VAC | rpm | 5000 |
| Maximum working speed 400VAC | – | |
| Torque Constant | Nm/Arms | 0.526 |
| Voltage Constant | Vrms/Krpm | 31.8 |
| Winding resistance | Ω | 2.3 |
| Winding inductance | mH | 7.4 |
| Electrical time constant | ms | 3.2 |
| Thermal Resistance | °C/W | 1.67 |
| Mechanical time constant | ms | 0.8 |
| Rotor Inertia without brake and without feedback | kg·cm² | 0.64 |
| Mass without holding brake | Kg | 2.25 |
| Mass with holding brake | Kg | 2.97 |
| Maximum axial shaft load applied on the shaft’s center | N | 110 |
| Maximun radial shaft load applied on the shaft’s center | N | 350 |
Family Specification
| Family Specification | Unit | TC 80 1,5 21 |
|---|---|---|
| Time Rating | Continuous | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 | |
| Certification | CE | |
| Recommendation | Rated output with 250 x 250 x 6 mm metallic heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing |
Family Overview
| Family Overview | Unit | TC 80 1,5 21 |
|---|---|---|
| Flange dimensions | mm | 80 |
| Rated Output Power | Watt | 480 – 1068 |
| Rated Torque | Nm | 1,53 – 3,4 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
TC 80 1,5 21
TC 80
datasheet
| Parameter | Unit | TC 80 1,5 15 |
|---|---|---|
| Continous Stall Torque | Nm | 1.74 |
| Peak Torque | Nm | 4.5 |
| Nominal Torque | Nm | 1.53 |
| Rated Voltage | V | 400 |
| Nominal power | W | 480 |
| Continuous stall Current | Arms | 1.91 |
| Maximun Current | Arms | 4.95 |
| Nominal Current | Arms | 1.73 |
| Nominal working Speed | rpm | 3000 |
| Maximum working speed 230VAC | rpm | 3900 |
| Maximum working speed 400VAC | 5000 | |
| Torque Constant | Nm/Arms | 0.91 |
| Voltage Constant | Vrms/Krpm | 55 |
| Winding resistance | Ω | 6.5 |
| Winding inductance | mH | 22.2 |
| Electrical time constant | ms | 3.4 |
| Thermal Resistance | °C/W | 1.67 |
| Mechanical time constant | ms | 0.75 |
| Rotor Inertia without brake and without feedback | kg·cm² | 0.64 |
| Mass without holding brake | Kg | 2.25 |
| Mass with holding brake | Kg | 2.97 |
| Maximum axial shaft load applied on the shaft’s center | N | 110 |
| Maximun radial shaft load applied on the shaft’s center | N | 350 |
Family Specification
| Family Specification | Unit | TC 80 1,5 15 |
|---|---|---|
| Time Rating | Continuous | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 | |
| Certification | CE | |
| Recommendation | Rated output with 250 x 250 x 6 mm metallic heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing |
Family Overview
| Family Overview | Unit | TC 80 1,5 15 |
|---|---|---|
| Flange dimensions | mm | 80 |
| Rated Output Power | Watt | 480 – 1068 |
| Rated Torque | Nm | 1,53 – 3,4 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
TC 80 1,5 15
TC 80
datasheet
| Parameter | Unit | TC 80 2,8 21 |
|---|---|---|
| Continous Stall Torque | Nm | 2.96 |
| Peak Torque | Nm | 8.4 |
| Nominal Torque | Nm | 2.55 |
| Rated Voltage | V | 230 |
| Nominal power | W | 800 |
| Continuous stall Current | Arms | 5.63 |
| Maximun Current | Arms | 15.97 |
| Nominal Current | Arms | 4.99 |
| Nominal working Speed | rpm | 3000 |
| Maximum working speed 230VAC | rpm | 5000 |
| Maximum working speed 400VAC | – | |
| Torque Constant | Nm/Arms | 0.526 |
| Voltage Constant | Vrms/Krpm | 31.8 |
| Winding resistance | Ω | 0.99 |
| Winding inductance | mH | 4.4 |
| Electrical time constant | ms | 4.4 |
| Thermal Resistance | °C/W | 1.32 |
| Mechanical time constant | ms | 0.62 |
| Rotor Inertia without brake and without feedback | kg·cm² | 1.16 |
| Mass without holding brake | Kg | 3.05 |
| Mass with holding brake | Kg | 3.77 |
| Maximum axial shaft load applied on the shaft’s center | N | 110 |
| Maximun radial shaft load applied on the shaft’s center | N | 350 |
Family Specification
| Family Specification | Unit | TC 80 2,8 21 |
|---|---|---|
| Time Rating | Continuous | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 | |
| Certification | CE | |
| Recommendation | Rated output with 250 x 250 x 6 mm metallic heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing |
Family Overview
| Family Overview | Unit | TC 80 2,8 21 |
|---|---|---|
| Flange dimensions | mm | 80 |
| Rated Output Power | Watt | 480 – 1068 |
| Rated Torque | Nm | 1,53 – 3,4 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
TC 80 2,8 21
TC 80
datasheet
| Parameter | Unit | TC 80 2,8 15 |
|---|---|---|
| Continous Stall Torque | Nm | 2.96 |
| Peak Torque | Nm | 8.4 |
| Nominal Torque | Nm | 2.55 |
| Rated Voltage | V | 400 |
| Nominal power | W | 800 |
| Continuous stall Current | Arms | 3.25 |
| Maximun Current | Arms | 9.23 |
| Nominal Current | Arms | 2.88 |
| Nominal working Speed | rpm | 3000 |
| Maximum working speed 230VAC | rpm | 3900 |
| Maximum working speed 400VAC | 5000 | |
| Torque Constant | Nm/Arms | 0.91 |
| Voltage Constant | Vrms/Krpm | 55 |
| Winding resistance | Ω | 3 |
| Winding inductance | mH | 13.2 |
| Electrical time constant | ms | 4.4 |
| Thermal Resistance | °C/W | 1.32 |
| Mechanical time constant | ms | 0.63 |
| Rotor Inertia without brake and without feedback | kg·cm² | 1.16 |
| Mass without holding brake | Kg | 3.05 |
| Mass with holding brake | Kg | 3.77 |
| Maximum axial shaft load applied on the shaft’s center | N | 110 |
| Maximun radial shaft load applied on the shaft’s center | N | 350 |
Family Specification
| Family Specification | Unit | TC 80 2,8 15 |
|---|---|---|
| Time Rating | Continuous | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 | |
| Certification | CE | |
| Recommendation | Rated output with 250 x 250 x 6 mm metallic heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing |
Family Overview
| Family Overview | Unit | TC 80 2,8 15 |
|---|---|---|
| Flange dimensions | mm | 80 |
| Rated Output Power | Watt | 480 – 1068 |
| Rated Torque | Nm | 1,53 – 3,4 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
TC 80 2,8 15
TC 80
datasheet
| Parameter | Unit | TC 80 4 15 |
|---|---|---|
| Continous Stall Torque | Nm | 4 |
| Peak Torque | Nm | 12 |
| Nominal Torque | Nm | 3.4 |
| Rated Voltage | V | 230 |
| Nominal power | W | 1068 |
| Continuous stall Current | Arms | 4.4 |
| Maximun Current | Arms | 13.19 |
| Nominal Current | Arms | 3.85 |
| Nominal working Speed | rpm | 3000 |
| Maximum working speed 230VAC | rpm | 3900 |
| Maximum working speed 400VAC | 5000 | |
| Torque Constant | Nm/Arms | 0.91 |
| Voltage Constant | Vrms/Krpm | 55 |
| Winding resistance | Ω | 1.9 |
| Winding inductance | mH | 8.9 |
| Electrical time constant | ms | 4.7 |
| Thermal Resistance | °C/W | 1 |
| Mechanical time constant | ms | 0.54 |
| Rotor Inertia without brake and without feedback | kg·cm² | 1.58 |
| Mass without holding brake | Kg | 4.1 |
| Mass with holding brake | Kg | 4.82 |
| Maximum axial shaft load applied on the shaft’s center | N | 110 |
| Maximun radial shaft load applied on the shaft’s center | N | 350 |
Family Specification
| Family Specification | Unit | TC 80 4 15 |
|---|---|---|
| Time Rating | Continuous | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 | |
| Certification | CE | |
| Recommendation | Rated output with 250 x 250 x 6 mm metallic heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing |
Family Overview
| Family Overview | Unit | TC 80 4 15 |
|---|---|---|
| Flange dimensions | mm | 80 |
| Rated Output Power | Watt | 480 – 1068 |
| Rated Torque | Nm | 1,53 – 3,4 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
TC 80 4 15
TC 80
datasheet
| Parameter | Unit | TC 80 4 17 |
|---|---|---|
| Continous Stall Torque | Nm | 4 |
| Peak Torque | Nm | 12 |
| Nominal Torque | Nm | 3.4 |
| Rated Voltage | V | 400 |
| Nominal power | W | 1068 |
| Continuous stall Current | Arms | 2.5 |
| Maximun Current | Arms | 7.5 |
| Nominal Current | Arms | 2.19 |
| Nominal working Speed | rpm | 3000 |
| Maximum working speed 230VAC | rpm | – |
| Maximum working speed 400VAC | 5000 | |
| Torque Constant | Nm/Arms | 1.6 |
| Voltage Constant | Vrms/Krpm | 96 |
| Winding resistance | Ω | 6.5 |
| Winding inductance | mH | 28.6 |
| Electrical time constant | ms | 4.4 |
| Thermal Resistance | °C/W | 1 |
| Mechanical time constant | ms | 0.6 |
| Rotor Inertia without brake and without feedback | kg·cm² | 1.58 |
| Mass without holding brake | Kg | 4.1 |
| Mass with holding brake | Kg | 4.82 |
| Maximum axial shaft load applied on the shaft’s center | N | 110 |
| Maximun radial shaft load applied on the shaft’s center | N | 350 |
Family Specification
| Family Specification | Unit | TC 80 4 17 |
|---|---|---|
| Time Rating | Continuous | |
| Insulation Class | F | |
| Enclosure | Totally enclosed. Self-cooled | |
| Protection Class | IP 65 standard on the body | |
| Insulation System UL/CSA | cURus , DV155J File nr. : E216686 | |
| Ambient Temperature | °C | 0 to 40 |
| Ambient Humidity | % | 5 to 85% (non-condensing) |
| Poles | 8 | |
| Thermal Protection | PT 1000 | |
| Certification | CE | |
| Recommendation | Rated output with 250 x 250 x 6 mm metallic heat sink flange coupling – Derating must be considered if the oil seal is applied – IP 54 standard shaft bushing |
Family Overview
| Family Overview | Unit | TC 80 4 17 |
|---|---|---|
| Flange dimensions | mm | 80 |
| Rated Output Power | Watt | 480 – 1068 |
| Rated Torque | Nm | 1,53 – 3,4 |
| Rated Speed | rpm | 3000 |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.