Flange dimensions: 142 mm
Rated Output Power: 2700 – 5000 W
Rated Torque: 8,6 – 15,9 Nm
Rated Speed: 3000 rpm
Flange dimensions: 142 mm
Rated Output Power: 2700 – 5000 W
Rated Torque: 8,6 – 15,9 Nm
Rated Speed: 3000 rpm
| Parameter | Unit | T 142 25,5 15 |
|---|---|---|
| Continous Stall Torque | Nm | 21 |
| Peak Torque | Nm | 65 |
| Nominal Torque | Nm | 15.9 |
| Rated Voltage | V | 230 |
| Nominal power | W | 5000 |
| Continuous stall Current | Arms | 23.1 |
| Maximun Current | Arms | 71.4 |
| Nominal Current | Arms | 18.4 |
| Nominal working Speed | rpm | 3000 |
| Maximum working speed 230VAC | rpm | 3900 |
| Maximum working speed 400VAC | 4400 | |
| Torque Constant | Nm/Arms | 0.91 |
| Voltage Constant | Vrms/Krpm | 55 |
| Winding resistance | Ohm | 0.24 |
| Winding inductance | mH | 1.3 |
| Electrical time constant | ms | 5.4 |
| Thermal Resistance | °C/W | 0.36 |
| Mechanical timeconstant high rotor inertia | ms | 3 |
| Mechanical time constant low rotor inertia | ms | 1.8 |
| High rotor inertia (as an option) without brake and without feedback | kg·cm² | 68.9 |
| Low rotor inertia (standard) without brake and without feedback | kg·cm² | 40.5 |
| Mass without holding brake | Kg | 20.5 |
| Mass with holding brake | Kg | 22.7 |
| Maximum axial shaft load applied on the shaft’s center | N | 240 |
| Maximun radial shaft load applied on the shaft’s center | N | 800 |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
