incl. 19% VAT
Flange dimensions: 40 mm
Rated Output Power: 60 – 100 W
Rated Torque: 0,19 – 0,32 Nm
Rated Speed: 3000 rpm
Flange dimensions: 40 mm
Rated Output Power: 60 – 100 W
Rated Torque: 0,19 – 0,32 Nm
Rated Speed: 3000 rpm
| Specification | TC 40 0,16 01 |
|---|---|
| Continous Stall Torque | 0.21 Nm |
| Peak Torque | 0.48 Nm |
| Nominal Torque | 0.19 Nm |
| Rated Voltage | 48 V |
| Nominal power | 60 W |
| Continuous stall Current | 2.23 Arms |
| Maximun Current | 5.09 Arms |
| Nominal Current | 2.09 Arms |
| Nominal working Speed | 3000 rpm |
| Maximum working speed 24VDC | – |
| Maximum working speed 48VDC | 5000 rpm |
| Maximum working speed 230VAC | – |
| Torque Constant | 0.094 Nm/Arms |
| Voltage Constant | 5.7 Vrms/Krpm |
| Winding resistance | 3.2 Ω |
| Winding inductance | 2.5 mH |
| Electrical time constant | 0.78 ms |
| Thermal Resistance | 2.38 °C/W |
| Mechanical time constant | 1.47 ms |
| Rotor Inertia without brake and without feedback | 0.027 kg·cm² |
| Mass without holding brake | 0.4 Kg |
| Mass with holding brake | 0.54 Kg |
| Mass without holding brake with absolute encoder | 0.41 Kg |
| Mass with holding brake with absolute encoder | 0.61 Kg |
| Maximum axial shaft load applied on the shaft’s center | 30 N |
| Maximun radial shaft load applied on the shaft’s center | 180 N |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.
