TC 142
incl. VAT
Flange dimensions: 142 mm
Rated Output Power: 2700 – 5000 W
Rated Torque: 8,6 – 15,9 Nm
Rated Speed: 3000 rpm
| Specification | T 142 12 15 | T 142 12 17 | T 142 16,5 15 | T 142 16,5 17 | T 142 21 15 | T 142 21 17 | T 142 25,5 15 | T 142 25,5 17 |
|---|---|---|---|---|---|---|---|---|
| Continous Stall Torque | 11 Nm | 11 Nm | 14 Nm | 14 Nm | 18 Nm | 18 Nm | 21 Nm | 21 Nm |
| Peak Torque | 31 Nm | 31 Nm | 42 Nm | 42 Nm | 55 Nm | 55 Nm | 65 Nm | 65 Nm |
| Nominal Torque | 8.6 Nm | 8.6 Nm | 11.1 Nm | 11.1 Nm | 13.1 Nm | 13.1 Nm | 15.9 Nm | 15.9 Nm |
| Rated Voltage | 230 V | 400 V | 230 V | 400 V | 230 V | 400 V | 230 V | 400 V |
| Nominal power | 2700 W | 2700 W | 3500 W | 3500 W | 4100 W | 4100 W | 5000 W | 5000 W |
| Continuous stall Current | 12.1 Arms | 6.9 Arms | 15.4 Arms | 8.7 Arms | 19.8 Arms | 11.2 Arms | 23.1 Arms | 13.1 Arms |
| Maximun Current | 34.1 Arms | 19.3 Arms | 46.2 Arms | 26.2 Arms | 60.5 Arms | 34.3 Arms | 71.4 Arms | 40.5 Arms |
| Nominal Current | 9.9 Arms | 5.6 Arms | 12.9 Arms | 7.3 Arms | 15.1 Arms | 8.5 Arms | 18.4 Arms | 10.4 Arms |
| Nominal working Speed | 3000 rpm | 3000 rpm | 3000 rpm | 3000 rpm | 3000 rpm | 3000 rpm | 3000 rpm | 3000 rpm |
| Maximum working speed 230VAC | 3900 rpm | 2200 rpm | 3900 rpm | 2200 rpm | 3900 rpm | 2200 rpm | 3900 rpm | 2200 rpm |
| Maximum working speed 400VAC | 4800 | 3900 | 4600 | 3900 | 4400 | 3900 | 4400 | 3900 |
| Torque Constant | 0.91 Nm/Arms | 1.6 Nm/Arms | 0.91 Nm/Arms | 1.6 Nm/Arms | 0.91 Nm/Arms | 1.6 Nm/Arms | 0.91 Nm/Arms | 1.6 Nm/Arms |
| Voltage Constant | 55 Vrms/Krpm | 97 Vrms/Krpm | 55 Vrms/Krpm | 97 Vrms/Krpm | 55 Vrms/Krpm | 97 Vrms/Krpm | 55 Vrms/Krpm | 97 Vrms/Krpm |
| Winding resistance | 0.6 Ω | 1.6 Ω | 0.4 Ω | 1.3 Ω | 0.25 Ω | 0.8 Ω | 0.24 Ω | 0.8 Ω |
| Winding inductance | 2.8 mH | 7.9 mH | 2.1 mH | 6.9 mH | 1.4 mH | 4.5 mH | 1.3 mH | 4.2 mH |
| Electrical time constant | 4.6 ms | 4.8 ms | 5.2 ms | 5.2 ms | 5.6 ms | 5.6 ms | 5.4 ms | 5.5 ms |
| Thermal Resistance | 0.52 °C/W | 0.59 °C/W | 0.47 °C/W | 0.45 °C/W | 0.46 °C/W | 0.45 °C/W | 0.36 °C/W | 0.34 °C/W |
| Mechanical timeconstant high rotor inertia | 4.2 ms | 3.7 ms | 3.4 ms | 3.5 ms | 2.8 ms | 2.9 ms | 3 ms | 3.1 ms |
| Mechanical time constant low rotor inertia | 2.5 ms | 2.2 ms | 2 ms | 2.1 ms | 1.6 ms | 1.7 ms | 1.8 ms | 1.8 ms |
| High rotor inertia (as an option) without brake and without feedback | 38.4 kg·cm² | 38.4 kg·cm² | 45.9 kg·cm² | 45.9 kg·cm² | 61.2 kg·cm² | 61.2 kg·cm² | 68.9 kg·cm² | 68.9 kg·cm² |
| Low rotor inertia (standard) without brake and without feedback | 23 kg·cm² | 23 kg·cm² | 27 kg·cm² | 27 kg·cm² | 36.1 kg·cm² | 36.1 kg·cm² | 40.5 kg·cm² | 40.5 kg·cm² |
| Mass without holding brake | 13.5 Kg | 13.5 Kg | 15.5 Kg | 15.5 Kg | 18.5 Kg | 18.5 Kg | 20.5 Kg | 20.5 Kg |
| Mass with holding brake | 15.7 Kg | 15.7 Kg | 17.7 Kg | 17.7 Kg | 20.7 Kg | 20.7 Kg | 22.7 Kg | 22.7 Kg |
| Maximum axial shaft load applied on the shaft’s center | 240 N | 240 N | 240 N | 240 N | 240 N | 240 N | 240 N | 240 N |
| Maximun radial shaft load applied on the shaft’s center | 800 N | 800 N | 800 N | 800 N | 800 N | 800 N | 800 N | 800 N |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
TC 142
datasheet
| Specification | T 142 12 15 |
|---|---|
| Continous Stall Torque | 11 Nm |
| Peak Torque | 31 Nm |
| Nominal Torque | 8.6 Nm |
| Rated Voltage | 230 V |
| Nominal power | 2700 W |
| Continuous stall Current | 12.1 Arms |
| Maximun Current | 34.1 Arms |
| Nominal Current | 9.9 Arms |
| Nominal working Speed | 3000 rpm |
| Maximum working speed 230VAC | 3900 rpm |
| Maximum working speed 400VAC | 4800 |
| Torque Constant | 0.91 Nm/Arms |
| Voltage Constant | 55 Vrms/Krpm |
| Winding resistance | 0.6 Ω |
| Winding inductance | 2.8 mH |
| Electrical time constant | 4.6 ms |
| Thermal Resistance | 0.52 °C/W |
| Mechanical timeconstant high rotor inertia | 4.2 ms |
| Mechanical time constant low rotor inertia | 2.5 ms |
| High rotor inertia (as an option) without brake and without feedback | 38.4 kg·cm² |
| Low rotor inertia (standard) without brake and without feedback | 23 kg·cm² |
| Mass without holding brake | 13.5 Kg |
| Mass with holding brake | 15.7 Kg |
| Maximum axial shaft load applied on the shaft’s center | 240 N |
| Maximun radial shaft load applied on the shaft’s center | 800 N |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
TC 142
datasheet
| Specification | T 142 12 17 |
|---|---|
| Continous Stall Torque | 11 Nm |
| Peak Torque | 31 Nm |
| Nominal Torque | 8.6 Nm |
| Rated Voltage | 400 V |
| Nominal power | 2700 W |
| Continuous stall Current | 6.9 Arms |
| Maximun Current | 19.3 Arms |
| Nominal Current | 5.6 Arms |
| Nominal working Speed | 3000 rpm |
| Maximum working speed 230VAC | 2200 rpm |
| Maximum working speed 400VAC | 3900 |
| Torque Constant | 1.6 Nm/Arms |
| Voltage Constant | 97 Vrms/Krpm |
| Winding resistance | 1.6 Ω |
| Winding inductance | 7.9 mH |
| Electrical time constant | 4.8 ms |
| Thermal Resistance | 0.59 °C/W |
| Mechanical timeconstant high rotor inertia | 3.7 ms |
| Mechanical time constant low rotor inertia | 2.2 ms |
| High rotor inertia (as an option) without brake and without feedback | 38.4 kg·cm² |
| Low rotor inertia (standard) without brake and without feedback | 23 kg·cm² |
| Mass without holding brake | 13.5 Kg |
| Mass with holding brake | 15.7 Kg |
| Maximum axial shaft load applied on the shaft’s center | 240 N |
| Maximun radial shaft load applied on the shaft’s center | 800 N |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
TC 142
datasheet
| Specification | T 142 16,5 15 |
|---|---|
| Continous Stall Torque | 14 Nm |
| Peak Torque | 42 Nm |
| Nominal Torque | 11.1 Nm |
| Rated Voltage | 230 V |
| Nominal power | 3500 W |
| Continuous stall Current | 15.4 Arms |
| Maximun Current | 46.2 Arms |
| Nominal Current | 12.9 Arms |
| Nominal working Speed | 3000 rpm |
| Maximum working speed 230VAC | 3900 rpm |
| Maximum working speed 400VAC | 4600 |
| Torque Constant | 0.91 Nm/Arms |
| Voltage Constant | 55 Vrms/Krpm |
| Winding resistance | 0.4 Ω |
| Winding inductance | 2.1 mH |
| Electrical time constant | 5.2 ms |
| Thermal Resistance | 0.47 °C/W |
| Mechanical timeconstant high rotor inertia | 3.4 ms |
| Mechanical time constant low rotor inertia | 2 ms |
| High rotor inertia (as an option) without brake and without feedback | 45.9 kg·cm² |
| Low rotor inertia (standard) without brake and without feedback | 27 kg·cm² |
| Mass without holding brake | 15.5 Kg |
| Mass with holding brake | 17.7 Kg |
| Maximum axial shaft load applied on the shaft’s center | 240 N |
| Maximun radial shaft load applied on the shaft’s center | 800 N |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
TC 142
datasheet
| Specification | T 142 16,5 17 |
|---|---|
| Continous Stall Torque | 14 Nm |
| Peak Torque | 42 Nm |
| Nominal Torque | 11.1 Nm |
| Rated Voltage | 400 V |
| Nominal power | 3500 W |
| Continuous stall Current | 8.7 Arms |
| Maximun Current | 26.2 Arms |
| Nominal Current | 7.3 Arms |
| Nominal working Speed | 3000 rpm |
| Maximum working speed 230VAC | 2200 rpm |
| Maximum working speed 400VAC | 3900 |
| Torque Constant | 1.6 Nm/Arms |
| Voltage Constant | 97 Vrms/Krpm |
| Winding resistance | 1.3 Ω |
| Winding inductance | 6.9 mH |
| Electrical time constant | 5.2 ms |
| Thermal Resistance | 0.45 °C/W |
| Mechanical timeconstant high rotor inertia | 3.5 ms |
| Mechanical time constant low rotor inertia | 2.1 ms |
| High rotor inertia (as an option) without brake and without feedback | 45.9 kg·cm² |
| Low rotor inertia (standard) without brake and without feedback | 27 kg·cm² |
| Mass without holding brake | 15.5 Kg |
| Mass with holding brake | 17.7 Kg |
| Maximum axial shaft load applied on the shaft’s center | 240 N |
| Maximun radial shaft load applied on the shaft’s center | 800 N |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
TC 142
datasheet
| Specification | T 142 21 15 |
|---|---|
| Continous Stall Torque | 18 Nm |
| Peak Torque | 55 Nm |
| Nominal Torque | 13.1 Nm |
| Rated Voltage | 230 V |
| Nominal power | 4100 W |
| Continuous stall Current | 19.8 Arms |
| Maximun Current | 60.5 Arms |
| Nominal Current | 15.1 Arms |
| Nominal working Speed | 3000 rpm |
| Maximum working speed 230VAC | 3900 rpm |
| Maximum working speed 400VAC | 4400 |
| Torque Constant | 0.91 Nm/Arms |
| Voltage Constant | 55 Vrms/Krpm |
| Winding resistance | 0.25 Ω |
| Winding inductance | 1.4 mH |
| Electrical time constant | 5.6 ms |
| Thermal Resistance | 0.46 °C/W |
| Mechanical timeconstant high rotor inertia | 2.8 ms |
| Mechanical time constant low rotor inertia | 1.6 ms |
| High rotor inertia (as an option) without brake and without feedback | 61.2 kg·cm² |
| Low rotor inertia (standard) without brake and without feedback | 36.1 kg·cm² |
| Mass without holding brake | 18.5 Kg |
| Mass with holding brake | 20.7 Kg |
| Maximum axial shaft load applied on the shaft’s center | 240 N |
| Maximun radial shaft load applied on the shaft’s center | 800 N |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
TC 142
datasheet
| Specification | T 142 21 17 |
|---|---|
| Continous Stall Torque | 18 Nm |
| Peak Torque | 55 Nm |
| Nominal Torque | 13.1 Nm |
| Rated Voltage | 400 V |
| Nominal power | 4100 W |
| Continuous stall Current | 11.2 Arms |
| Maximun Current | 34.3 Arms |
| Nominal Current | 8.5 Arms |
| Nominal working Speed | 3000 rpm |
| Maximum working speed 230VAC | 2200 rpm |
| Maximum working speed 400VAC | 3900 |
| Torque Constant | 1.6 Nm/Arms |
| Voltage Constant | 97 Vrms/Krpm |
| Winding resistance | 0.8 Ω |
| Winding inductance | 4.5 mH |
| Electrical time constant | 5.6 ms |
| Thermal Resistance | 0.45 °C/W |
| Mechanical timeconstant high rotor inertia | 2.9 ms |
| Mechanical time constant low rotor inertia | 1.7 ms |
| High rotor inertia (as an option) without brake and without feedback | 61.2 kg·cm² |
| Low rotor inertia (standard) without brake and without feedback | 36.1 kg·cm² |
| Mass without holding brake | 18.5 Kg |
| Mass with holding brake | 20.7 Kg |
| Maximum axial shaft load applied on the shaft’s center | 240 N |
| Maximun radial shaft load applied on the shaft’s center | 800 N |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
TC 142
datasheet
| Specification | T 142 25,5 15 |
|---|---|
| Continous Stall Torque | 21 Nm |
| Peak Torque | 65 Nm |
| Nominal Torque | 15.9 Nm |
| Rated Voltage | 230 V |
| Nominal power | 5000 W |
| Continuous stall Current | 23.1 Arms |
| Maximun Current | 71.4 Arms |
| Nominal Current | 18.4 Arms |
| Nominal working Speed | 3000 rpm |
| Maximum working speed 230VAC | 3900 rpm |
| Maximum working speed 400VAC | 4400 |
| Torque Constant | 0.91 Nm/Arms |
| Voltage Constant | 55 Vrms/Krpm |
| Winding resistance | 0.24 Ω |
| Winding inductance | 1.3 mH |
| Electrical time constant | 5.4 ms |
| Thermal Resistance | 0.36 °C/W |
| Mechanical timeconstant high rotor inertia | 3 ms |
| Mechanical time constant low rotor inertia | 1.8 ms |
| High rotor inertia (as an option) without brake and without feedback | 68.9 kg·cm² |
| Low rotor inertia (standard) without brake and without feedback | 40.5 kg·cm² |
| Mass without holding brake | 20.5 Kg |
| Mass with holding brake | 22.7 Kg |
| Maximum axial shaft load applied on the shaft’s center | 240 N |
| Maximun radial shaft load applied on the shaft’s center | 800 N |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
TC 142
datasheet
| Specification | T 142 25,5 17 |
|---|---|
| Continous Stall Torque | 21 Nm |
| Peak Torque | 65 Nm |
| Nominal Torque | 15.9 Nm |
| Rated Voltage | 400 V |
| Nominal power | 5000 W |
| Continuous stall Current | 13.1 Arms |
| Maximun Current | 40.5 Arms |
| Nominal Current | 10.4 Arms |
| Nominal working Speed | 3000 rpm |
| Maximum working speed 230VAC | 2200 rpm |
| Maximum working speed 400VAC | 3900 |
| Torque Constant | 1.6 Nm/Arms |
| Voltage Constant | 97 Vrms/Krpm |
| Winding resistance | 0.8 Ω |
| Winding inductance | 4.2 mH |
| Electrical time constant | 5.5 ms |
| Thermal Resistance | 0.34 °C/W |
| Mechanical timeconstant high rotor inertia | 3.1 ms |
| Mechanical time constant low rotor inertia | 1.8 ms |
| High rotor inertia (as an option) without brake and without feedback | 68.9 kg·cm² |
| Low rotor inertia (standard) without brake and without feedback | 40.5 kg·cm² |
| Mass without holding brake | 20.5 Kg |
| Mass with holding brake | 22.7 Kg |
| Maximum axial shaft load applied on the shaft’s center | 240 N |
| Maximun radial shaft load applied on the shaft’s center | 800 N |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Reviews
There are no reviews yet.