TC 115
incl. VAT
Flange dimensions: 115 mm
Rated Output Power: 840 – 2300 W
Rated Torque: 2,7 – 7,3 Nm
Rated Speed: 3000 rpm
| Specification | T 115 3 21 | T 115 3 15 | T 115 5,2 14 | T 115 5,2 15 | T 115 7 15 | T 115 7 17 | T 115 9,2 15 | T 115 9,2 17 | T 115 11 15 | T 115 11 17 |
|---|---|---|---|---|---|---|---|---|---|---|
| Continous Stall Torque | 3 Nm | 3 Nm | 5 Nm | 5 Nm | 6.5 Nm | 6.5 Nm | 8.5 Nm | 8.5 Nm | 9.5 Nm | 9.5 Nm |
| Peak Torque | 9 Nm | 9 Nm | 15.6 Nm | 15.6 Nm | 21 Nm | 21 Nm | 27.6 Nm | 27.6 Nm | 33 Nm | 33 Nm |
| Nominal Torque | 2.7 Nm | 2.7 Nm | 4.1 Nm | 4.1 Nm | 5.3 Nm | 5.3 Nm | 6.4 Nm | 6.4 Nm | 7.3 Nm | 7.3 Nm |
| Rated Voltage | 230 V | 400 V | 230 V | 400 V | 230 V | 400 V | 230 V | 400 V | 230 V | 400 V |
| Nominal power | 840 W | 840 W | 1300 W | 1300 W | 1650 W | 1650 W | 2000 W | 2000 W | 2300 W | 2300 W |
| Continuous stall Current | 5.7 Arms | 3.3 Arms | 8.4 Arms | 5.5 Arms | 7.1 Arms | 4.1 Arms | 9.3 Arms | 5.3 Arms | 10.4 Arms | 5.9 Arms |
| Maximun Current | 17.1 Arms | 9.9 Arms | 26.2 Arms | 17.1 Arms | 23.1 Arms | 13.1 Arms | 30.3 Arms | 17.2 Arms | 36.3 Arms | 20.6 Arms |
| Nominal Current | 5.3 Arms | 3.1 Arms | 7.3 Arms | 4.8 Arms | 6.1 Arms | 3.4 Arms | 7.3 Arms | 4.2 Arms | 8.5 Arms | 4.8 Arms |
| Nominal working Speed | 3000 rpm | 3000 rpm | 3000 rpm | 3000 rpm | 3000 rpm | 3000 rpm | 3000 rpm | 3000 rpm | 3000 rpm | 3000 rpm |
| Maximum working speed 24VDC | 5000 rpm | 3900 rpm | 5000 rpm | 3900 rpm | 3900 rpm | 2200 rpm | – | – | – | – |
| Maximum working speed 400VAC | – | 5000 | – | 5000 | 4500 | 3900 | 4500 | 3900 | 4500 | 3900 |
| Torque Constant | 0.53 Nm/Arms | 0.91 Nm/Arms | 0.6 Nm/Arms | 0.91 Nm/Arms | 0.91 Nm/Arms | 1.6 Nm/Arms | 0.91 Nm/Arms | 1.6 Nm/Arms | 0.91 Nm/Arms | 1.6 Nm/Arms |
| Voltage Constant | 31.8 Vrms/Krpm | 55 Vrms/Krpm | 36 Vrms/Krpm | 55 Vrms/Krpm | 55 Vrms/Krpm | 97 Vrms/Krpm | 55 Vrms/Krpm | 97 Vrms/Krpm | 55 Vrms/Krpm | 97 Vrms/Krpm |
| Winding resistance | 1.3 Ω | 4 Ω | 0.9 Ω | 2.1 Ω | 1.2 Ω | 3.7 Ω | 0.9 Ω | 2.8 Ω | 0.9 Ω | 2.8 Ω |
| Winding inductance | 3 mH | 9 mH | 2.4 mH | 6.1 mH | 4.1 mH | 12 mH | 3.1 mH | 10 mH | 2.9 mH | 8.6 mH |
| Electrical time constant | 2.3 ms | 2.3 ms | 2.7 ms | 2.9 ms | 3.4 ms | 3.2 ms | 3.4 ms | 3.6 ms | 3.2 ms | 3.1 ms |
| Thermal Resistance | 1.08 °C/W | 1.05 °C/W | 0.72 °C/W | 0.72 °C/W | 0.74 °C/W | 0.75 °C/W | 0.58 °C/W | 0.58 °C/W | 0.45 °C/W | 0.46 °C/W |
| Mechanical timeconstant high rotor inertia | 5.1 ms | 5.3 ms | 4 ms | 4 ms | 3.1 ms | 3 ms | 2.9 ms | 2.9 ms | 3.5 ms | 3.4 ms |
| Mechanical time constant low rotor inertia | 5.3 ms | 3.4 ms | 2.6 ms | 2.6 ms | 1.9 ms | 1.9 ms | 1.8 ms | 1.8 ms | 2.2 ms | 2.1 ms |
| High rotor inertia (as an option) without brake and without feedback | 7.3 kg·cm² | 7.3 kg·cm² | 10.6 kg·cm² | 10.6 kg·cm² | 14.1 kg·cm² | 14.1 kg·cm² | 17.5 kg·cm² | 17.5 kg·cm² | 20.8 kg·cm² | 20.8 kg·cm² |
| Low rotor inertia (as an option) without brake and without feedback | 4.7 kg·cm² | 4.7 kg·cm² | 6.8 kg·cm² | 6.8 kg·cm² | 8.8 kg·cm² | 8.8 kg·cm² | – | – | – | – |
| Mass without holding brake | 4.7 Kg | 4.7 Kg | 6.2 Kg | 6.2 Kg | 7.5 Kg | 7.5 Kg | 8.8 Kg | 8.8 Kg | 9.9 Kg | 9.9 Kg |
| Mass with holding brake | 5.9 Kg | 5.9 Kg | 7.4 Kg | 7.4 Kg | 8.7 Kg | 8.7 Kg | 9.9 Kg | 9.9 Kg | 11.7 Kg | 11.7 Kg |
| Maximum axial shaft load applied on the shaft’s center | 180 N | 180 N | 180 N | 180 N | 180 N | 180 N | 180 N | 180 N | 180 N | 180 N |
| Maximun radial shaft load applied on the shaft’s center | 600 N | 600 N | 600 N | 600 N | 600 N | 600 N | 600 N | 600 N | 600 N | 600 N |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
TC 115
datasheet
| Specification | T 115 3 21 |
|---|---|
| Continous Stall Torque | 3 Nm |
| Peak Torque | 9 Nm |
| Nominal Torque | 2.7 Nm |
| Rated Voltage | 230 V |
| Nominal power | 840 W |
| Continuous stall Current | 5.7 Arms |
| Maximun Current | 17.1 Arms |
| Nominal Current | 5.3 Arms |
| Nominal working Speed | 3000 rpm |
| Maximum working speed 24VDC | 5000 rpm |
| Torque Constant | 0.53 Nm/Arms |
| Voltage Constant | 31.8 Vrms/Krpm |
| Winding resistance | 1.3 Ω |
| Winding inductance | 3 mH |
| Electrical time constant | 2.3 ms |
| Thermal Resistance | 1.08 °C/W |
| Mechanical timeconstant high rotor inertia | 5.1 ms |
| Mechanical time constant low rotor inertia | 5.3 ms |
| High rotor inertia (as an option) without brake and without feedback | 7.3 kg·cm² |
| Low rotor inertia (as an option) without brake and without feedback | 4.7 kg·cm² |
| Mass without holding brake | 4.7 Kg |
| Mass with holding brake | 5.9 Kg |
| Maximum axial shaft load applied on the shaft’s center | 180 N |
| Maximun radial shaft load applied on the shaft’s center | 600 N |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
TC 115
datasheet
| Specification | T 115 3 15 |
|---|---|
| Continous Stall Torque | 3 Nm |
| Peak Torque | 9 Nm |
| Nominal Torque | 2.7 Nm |
| Rated Voltage | 400 V |
| Nominal power | 840 W |
| Continuous stall Current | 3.3 Arms |
| Maximun Current | 9.9 Arms |
| Nominal Current | 3.1 Arms |
| Nominal working Speed | 3000 rpm |
| Maximum working speed 24VDC | 3900 rpm |
| Maximum working speed 400VAC | 5000 |
| Torque Constant | 0.91 Nm/Arms |
| Voltage Constant | 55 Vrms/Krpm |
| Winding resistance | 4 Ω |
| Winding inductance | 9 mH |
| Electrical time constant | 2.3 ms |
| Thermal Resistance | 1.05 °C/W |
| Mechanical timeconstant high rotor inertia | 5.3 ms |
| Mechanical time constant low rotor inertia | 3.4 ms |
| High rotor inertia (as an option) without brake and without feedback | 7.3 kg·cm² |
| Low rotor inertia (as an option) without brake and without feedback | 4.7 kg·cm² |
| Mass without holding brake | 4.7 Kg |
| Mass with holding brake | 5.9 Kg |
| Maximum axial shaft load applied on the shaft’s center | 180 N |
| Maximun radial shaft load applied on the shaft’s center | 600 N |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
TC 115
datasheet
| Specification | T 115 5,2 14 |
|---|---|
| Continous Stall Torque | 5 Nm |
| Peak Torque | 15.6 Nm |
| Nominal Torque | 4.1 Nm |
| Rated Voltage | 230 V |
| Nominal power | 1300 W |
| Continuous stall Current | 8.4 Arms |
| Maximun Current | 26.2 Arms |
| Nominal Current | 7.3 Arms |
| Nominal working Speed | 3000 rpm |
| Maximum working speed 24VDC | 5000 rpm |
| Torque Constant | 0.6 Nm/Arms |
| Voltage Constant | 36 Vrms/Krpm |
| Winding resistance | 0.9 Ω |
| Winding inductance | 2.4 mH |
| Electrical time constant | 2.7 ms |
| Thermal Resistance | 0.72 °C/W |
| Mechanical timeconstant high rotor inertia | 4 ms |
| Mechanical time constant low rotor inertia | 2.6 ms |
| High rotor inertia (as an option) without brake and without feedback | 10.6 kg·cm² |
| Low rotor inertia (as an option) without brake and without feedback | 6.8 kg·cm² |
| Mass without holding brake | 6.2 Kg |
| Mass with holding brake | 7.4 Kg |
| Maximum axial shaft load applied on the shaft’s center | 180 N |
| Maximun radial shaft load applied on the shaft’s center | 600 N |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
TC 115
datasheet
| Specification | T 115 5,2 15 |
|---|---|
| Continous Stall Torque | 5 Nm |
| Peak Torque | 15.6 Nm |
| Nominal Torque | 4.1 Nm |
| Rated Voltage | 400 V |
| Nominal power | 1300 W |
| Continuous stall Current | 5.5 Arms |
| Maximun Current | 17.1 Arms |
| Nominal Current | 4.8 Arms |
| Nominal working Speed | 3000 rpm |
| Maximum working speed 24VDC | 3900 rpm |
| Maximum working speed 400VAC | 5000 |
| Torque Constant | 0.91 Nm/Arms |
| Voltage Constant | 55 Vrms/Krpm |
| Winding resistance | 2.1 Ω |
| Winding inductance | 6.1 mH |
| Electrical time constant | 2.9 ms |
| Thermal Resistance | 0.72 °C/W |
| Mechanical timeconstant high rotor inertia | 4 ms |
| Mechanical time constant low rotor inertia | 2.6 ms |
| High rotor inertia (as an option) without brake and without feedback | 10.6 kg·cm² |
| Low rotor inertia (as an option) without brake and without feedback | 6.8 kg·cm² |
| Mass without holding brake | 6.2 Kg |
| Mass with holding brake | 7.4 Kg |
| Maximum axial shaft load applied on the shaft’s center | 180 N |
| Maximun radial shaft load applied on the shaft’s center | 600 N |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
TC 115
datasheet
| Specification | T 115 7 15 |
|---|---|
| Continous Stall Torque | 6.5 Nm |
| Peak Torque | 21 Nm |
| Nominal Torque | 5.3 Nm |
| Rated Voltage | 230 V |
| Nominal power | 1650 W |
| Continuous stall Current | 7.1 Arms |
| Maximun Current | 23.1 Arms |
| Nominal Current | 6.1 Arms |
| Nominal working Speed | 3000 rpm |
| Maximum working speed 24VDC | 3900 rpm |
| Maximum working speed 400VAC | 4500 |
| Torque Constant | 0.91 Nm/Arms |
| Voltage Constant | 55 Vrms/Krpm |
| Winding resistance | 1.2 Ω |
| Winding inductance | 4.1 mH |
| Electrical time constant | 3.4 ms |
| Thermal Resistance | 0.74 °C/W |
| Mechanical timeconstant high rotor inertia | 3.1 ms |
| Mechanical time constant low rotor inertia | 1.9 ms |
| High rotor inertia (as an option) without brake and without feedback | 14.1 kg·cm² |
| Low rotor inertia (as an option) without brake and without feedback | 8.8 kg·cm² |
| Mass without holding brake | 7.5 Kg |
| Mass with holding brake | 8.7 Kg |
| Maximum axial shaft load applied on the shaft’s center | 180 N |
| Maximun radial shaft load applied on the shaft’s center | 600 N |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
TC 115
datasheet
| Specification | T 115 7 17 |
|---|---|
| Continous Stall Torque | 6.5 Nm |
| Peak Torque | 21 Nm |
| Nominal Torque | 5.3 Nm |
| Rated Voltage | 400 V |
| Nominal power | 1650 W |
| Continuous stall Current | 4.1 Arms |
| Maximun Current | 13.1 Arms |
| Nominal Current | 3.4 Arms |
| Nominal working Speed | 3000 rpm |
| Maximum working speed 24VDC | 2200 rpm |
| Maximum working speed 400VAC | 3900 |
| Torque Constant | 1.6 Nm/Arms |
| Voltage Constant | 97 Vrms/Krpm |
| Winding resistance | 3.7 Ω |
| Winding inductance | 12 mH |
| Electrical time constant | 3.2 ms |
| Thermal Resistance | 0.75 °C/W |
| Mechanical timeconstant high rotor inertia | 3 ms |
| Mechanical time constant low rotor inertia | 1.9 ms |
| High rotor inertia (as an option) without brake and without feedback | 14.1 kg·cm² |
| Low rotor inertia (as an option) without brake and without feedback | 8.8 kg·cm² |
| Mass without holding brake | 7.5 Kg |
| Mass with holding brake | 8.7 Kg |
| Maximum axial shaft load applied on the shaft’s center | 180 N |
| Maximun radial shaft load applied on the shaft’s center | 600 N |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
TC 115
datasheet
| Specification | T 115 9,2 15 |
|---|---|
| Continous Stall Torque | 8.5 Nm |
| Peak Torque | 27.6 Nm |
| Nominal Torque | 6.4 Nm |
| Rated Voltage | 230 V |
| Nominal power | 2000 W |
| Continuous stall Current | 9.3 Arms |
| Maximun Current | 30.3 Arms |
| Nominal Current | 7.3 Arms |
| Nominal working Speed | 3000 rpm |
| Maximum working speed 230VAC | 3900 rpm |
| Maximum working speed 400VAC | 4500 |
| Torque Constant | 0.91 Nm/Arms |
| Voltage Constant | 55 Vrms/Krpm |
| Winding resistance | 0.9 Ω |
| Winding inductance | 3.1 mH |
| Electrical time constant | 3.4 ms |
| Thermal Resistance | 0.58 °C/W |
| Mechanical timeconstant high rotor inertia | 2.9 ms |
| Mechanical time constant low rotor inertia | 1.8 ms |
| High rotor inertia (as an option) without brake and without feedback | 17.5 kg·cm² |
| Low rotor inertia (standard) without brake and without feedback | 10.9 kg·cm² |
| Mass without holding brake | 8.8 Kg |
| Mass with holding brake | 9.9 Kg |
| Maximum axial shaft load applied on the shaft’s center | 180 N |
| Maximun radial shaft load applied on the shaft’s center | 600 N |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
TC 115
datasheet
| Specification | T 115 9,2 17 |
|---|---|
| Continous Stall Torque | 8.5 Nm |
| Peak Torque | 27.6 Nm |
| Nominal Torque | 6.4 Nm |
| Rated Voltage | 400 V |
| Nominal power | 2000 W |
| Continuous stall Current | 5.3 Arms |
| Maximun Current | 17.2 Arms |
| Nominal Current | 4.2 Arms |
| Nominal working Speed | 3000 rpm |
| Maximum working speed 230VAC | 2200 rpm |
| Maximum working speed 400VAC | 3900 |
| Torque Constant | 1.6 Nm/Arms |
| Voltage Constant | 97 Vrms/Krpm |
| Winding resistance | 2.8 Ω |
| Winding inductance | 10 mH |
| Electrical time constant | 3.6 ms |
| Thermal Resistance | 0.58 °C/W |
| Mechanical timeconstant high rotor inertia | 2.9 ms |
| Mechanical time constant low rotor inertia | 1.8 ms |
| High rotor inertia (as an option) without brake and without feedback | 17.5 kg·cm² |
| Low rotor inertia (standard) without brake and without feedback | 10.9 kg·cm² |
| Mass without holding brake | 8.8 Kg |
| Mass with holding brake | 9.9 Kg |
| Maximum axial shaft load applied on the shaft’s center | 180 N |
| Maximun radial shaft load applied on the shaft’s center | 600 N |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
TC 115
datasheet
| Specification | T 115 11 15 |
|---|---|
| Continous Stall Torque | 9.5 Nm |
| Peak Torque | 33 Nm |
| Nominal Torque | 7.3 Nm |
| Rated Voltage | 230 V |
| Nominal power | 2300 W |
| Continuous stall Current | 10.4 Arms |
| Maximun Current | 36.3 Arms |
| Nominal Current | 8.5 Arms |
| Nominal working Speed | 3000 rpm |
| Maximum working speed 230VAC | 3900 rpm |
| Maximum working speed 400VAC | 4500 |
| Torque Constant | 0.91 Nm/Arms |
| Voltage Constant | 55 Vrms/Krpm |
| Winding resistance | 0.9 Ω |
| Winding inductance | 2.9 mH |
| Electrical time constant | 3.2 ms |
| Thermal Resistance | 0.45 °C/W |
| Mechanical timeconstant high rotor inertia | 3.5 ms |
| Mechanical time constant low rotor inertia | 2.2 ms |
| High rotor inertia (as an option) without brake and without feedback | 20.8 kg·cm² |
| Low rotor inertia (standard) without brake and without feedback | 13 kg·cm² |
| Mass without holding brake | 9.9 Kg |
| Mass with holding brake | 11.7 Kg |
| Maximum axial shaft load applied on the shaft’s center | 180 N |
| Maximun radial shaft load applied on the shaft’s center | 600 N |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
TC 115
datasheet
| Specification | T 115 11 17 |
|---|---|
| Continous Stall Torque | 9.5 Nm |
| Peak Torque | 33 Nm |
| Nominal Torque | 7.3 Nm |
| Rated Voltage | 400 V |
| Nominal power | 2300 W |
| Continuous stall Current | 5.9 Arms |
| Maximun Current | 20.6 Arms |
| Nominal Current | 4.8 Arms |
| Nominal working Speed | 3000 rpm |
| Maximum working speed 230VAC | 2200 rpm |
| Maximum working speed 400VAC | 3900 |
| Torque Constant | 1.6 Nm/Arms |
| Voltage Constant | 97 Vrms/Krpm |
| Winding resistance | 2.8 Ω |
| Winding inductance | 8.6 mH |
| Electrical time constant | 3.1 ms |
| Thermal Resistance | 0.46 °C/W |
| Mechanical timeconstant high rotor inertia | 3.4 ms |
| Mechanical time constant low rotor inertia | 2.1 ms |
| High rotor inertia (as an option) without brake and without feedback | 20.8 kg·cm² |
| Low rotor inertia (standard) without brake and without feedback | 13 kg·cm² |
| Mass without holding brake | 9.9 Kg |
| Mass with holding brake | 11.7 Kg |
| Maximum axial shaft load applied on the shaft’s center | 180 N |
| Maximun radial shaft load applied on the shaft’s center | 600 N |
Applications
Medical
Biomedical
Agriculture
Processing & Packaging
Logistic & Intralogistic
Reviews
There are no reviews yet.